WMARK NG-X1 Vector Motor Clipper with DLC Fade Blade

Ten thousand RPM at a working barber's price.

The WMARK NG-X1 is a cordless professional clipper driven by a vector motor rated at a maximum of 10,000 RPM, running a 0.1mm-gapped stainless steel fade blade finished with a DLC coating. Its 2,500mAh lithium-ion battery gives approximately 150 minutes of cutting per charge, and it refills in 3 to 4 hours from either the included charging base or a USB Type-C cable. It is built for barbers who want maglev-class blade speed on a second or third chair without a flagship price.

• Blade speed that shears instead of pushes: a vector motor rated to a maximum of 10,000 RPM, drawing 10W.
• Fade close out of the box: the blade ships at a 0.1mm gap in stainless steel with a DLC finish.
• Two and a half hours of cutting per charge: a 2,500mAh lithium-ion pack rated at approximately 150 minutes.
• Charge it two ways: drop it on the included base at the station, or run a USB Type-C cable in the kit bag.
• Guide lengths already sorted: six magnetic guide combs covering 1.5mm through 13mm.

Specifications

• Model: NG-X1
• Motor: Vector motor
• Motor Speed: Max 10,000 RPM
• Power: 10W
• Battery: 2,500mAh lithium-ion
• Working Time: Approximately 150 minutes
• Charging Time: 3–4 hours
• Charging: USB Type-C cable or charging base
• Blade: 0.1mm gapped stainless steel fade blade, DLC coated

In the Box

• WMARK NG-X1 clipper
• 6 magnetic guide combs (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm)
• Charging base
• USB Type-C charging cable
• Cleaning brush
• Lubricating oil
• 2 extra blade covers
• 2 hair stickers
• Styling comb

Questions Barbers Ask

How long does the NG-X1 run per charge?

Approximately 150 minutes of working time from the 2,500mAh battery, with a 3 to 4 hour charge.

Is the blade zero-gapped from the factory?

Not quite zero. WMARK specifies the blade at a 0.1mm gap. It is stainless steel with a DLC coating.

Can I charge it with a USB-C cable instead of the base?

Yes. WMARK supplies both a charging base and a USB Type-C cable, and either will charge the clipper.

How is this different from the NG-X1 PLUS?

The PLUS carries a larger 3,000mAh battery rated at 180 minutes with a 3-hour charge, plus an LED display. The motor rating is the same on both.

Why Barbers Love It

Blade speed is the thing you feel first. At 10,000 RPM the clipper stops fighting a dense crown and starts feeding through it, which shows up as fewer passes and less heat against the scalp. The magnetic guides are the sleeper feature: they seat with a click and do not walk off the blade halfway down a taper the way clip-on guards do.

About WMARK

WMARK, operating as New Gain, manufactures professional clippers, trimmers and barber tools and publishes full specification tables for its models.

Your Barber Connect – Stocked. Connected. Barber Approved. 💈

• Fast Shipping
• Authorized Dealer
• Manufacturer Warranty