{"title":"Blades and Guards","description":"\u003cp data-start=\"120\" data-end=\"372\"\u003eKeep your cuts sharp and your fades flawless with our Blades \u0026amp; Guards collection. Featuring high-performance clipper and trimmer blades, plus precision guide combs in every size, these essentials help you work faster, cleaner, and with total control.\u003c\/p\u003e\n\u003cp data-start=\"374\" data-end=\"603\"\u003eFrom zero-gap blades for extra-close cuts to durable guards that deliver consistent lengths, we’ve got the tools to match every style and every client. Trusted by barbers who demand accuracy and built to fit today’s top brands.\u003c\/p\u003e","products":[{"product_id":"andis-large-master-magnetic-comb-set-01415-4-piece","title":"Andis Master Magnetic Comb Set (Large) #01415 – 4pc Set","description":"\u003cp\u003eThe long guards, and they stay where you put them.\u003c\/p\u003e\u003cp\u003eThe Andis Large Master Magnetic Comb Set #01415 is a four-piece guard set covering the longer end of the range — 5\/8\", 3\/4\", 7\/8\" and 1\". They attach with rare earth magnets rather than plastic clips, which is the difference between a guard that stays seated through a full pass and one that shifts and leaves a line. Built for the Andis Master.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo guard slip mid-pass\u003c\/strong\u003e — dual rare earth magnets hold the guide flat against the blade under pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers the long lengths\u003c\/strong\u003e — 5\/8\" through 1\" for scissor-length work off the clipper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn and off fast\u003c\/strong\u003e — magnetic attachment beats fighting plastic tabs between sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven, repeatable lengths\u003c\/strong\u003e — the same guard gives the same result on every client.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for the Master\u003c\/strong\u003e — sized specifically for the Andis Master clipper blade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePieces:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 5\/8\", 3\/4\", 7\/8\", 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Dual rare earth magnets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Andis #01415\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow is this different from the #01410 set?\u003c\/h3\u003e\u003cp\u003eThis is the large set — 5\/8\" to 1\". The 01410 set covers the short end, sizes 0 through 4. Most barbers who work long lengths end up owning both.\u003c\/p\u003e\u003ch3\u003eWill magnetic guards damage my blade?\u003c\/h3\u003e\u003cp\u003eNo. The magnets grip the blade body, not the cutting teeth. They are widely used across professional clipper lines.\u003c\/p\u003e\u003ch3\u003eDo they fit clippers other than the Master?\u003c\/h3\u003e\u003cp\u003eThey are made for the Andis Master blade profile. Fit on other clippers is not guaranteed — check your blade shape before ordering.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003ePlastic guards flex and pop off. Magnetic guards do not, and on a long-length cut where every pass has to match, that is the whole job.\u003c\/p\u003e\u003ch3\u003eAbout Andis\u003c\/h3\u003e\u003cp\u003eAndis has built professional clippers, blades and attachments since 1922; the Master is one of its longest-running barbershop clippers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Andis","offers":[{"title":"Default Title","offer_id":31622846480426,"sku":"","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/ANDIS_LARGE_MASTER_MAGNETIC_COMB_SET_Model_01415.jpg?v=1745864118"},{"product_id":"andis-master-dual-magnet-hair-clipper-comb-guide-set-01410","title":"Andis Master Dual Magnetic Comb Set #01410 – 5pc Guards","description":"\u003cp\u003eFade guards that snap on and refuse to move.\u003c\/p\u003e\u003cp\u003eThe Andis Master Dual Magnetic Comb Guide Set #01410 is a five-piece guard set in sizes 0, 1, 2, 3 and 4 — the working range for fades, tapers and blending. Two magnets per guard hold it flat and square against the blade, which matters most on the guard sizes you swap fastest. This is the short-end set for the Andis Master.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlend faster\u003c\/strong\u003e — magnetic guards come off and back on in a second, which is what a fade actually demands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo shifting under pressure\u003c\/strong\u003e — dual magnets keep the guide seated so lengths stay consistent across the head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe fade range covered\u003c\/strong\u003e — sizes 0 through 4, the numbers used on nearly every cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNothing to break\u003c\/strong\u003e — no plastic clip tabs to snap off in the bag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the Master\u003c\/strong\u003e — shaped to the Andis Master blade profile.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePieces:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 0, 1, 2, 3, 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Dual magnets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Andis Master clippers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Andis #01410\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhat is the difference between #01410 and #01415?\u003c\/h3\u003e\u003cp\u003e01410 is the short set, sizes 0 to 4. 01415 is the large set, 5\/8\" to 1\". Together they cover the full length range.\u003c\/p\u003e\u003ch3\u003eAre magnetic guards worth the extra over snap-ons?\u003c\/h3\u003e\u003cp\u003eIf you fade all day, yes. The time saved swapping guards adds up, and they do not pop off mid-pass.\u003c\/p\u003e\u003ch3\u003eWill they fit my Wahl clipper?\u003c\/h3\u003e\u003cp\u003eNo. They are cut for the Andis Master blade shape. Wahl blades use a different profile.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eThese are the guards that live on the station and never go back in the box, because they are the five you use on every single head.\u003c\/p\u003e\u003ch3\u003eAbout Andis\u003c\/h3\u003e\u003cp\u003eAndis has manufactured professional clippers, blades and attachment combs since 1922.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Andis","offers":[{"title":"Default Title","offer_id":31622874923050,"sku":"","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/products\/andis-master-dual-magnetic-comb-set-4pc-01410_package_1024x1024_2x_901c82b1-96d6-4efb-a8ca-92f5d9b9efbb.jpg?v=1632164712"},{"product_id":"andis-replacement-cutters-foil-copper-17230","title":"Andis ProFoil Replacement Cutters \u0026 Foil Assembly #17280","description":"\u003cp\u003eFresh foil, fresh cutters, factory-close finish again.\u003c\/p\u003e\u003cp\u003eThis is the genuine Andis #17280 replacement foil assembly and inner cutter set for the ProFoil shaver line. Andis coats the foil in golden-titanium, and the assembly drops onto ProFoil Lithium and ProFoil Lithium Plus Titanium Foil Shavers. When your shaver starts dragging on the third pass instead of the first, this is the part that fixes it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRestores the skin-close cut your shaver had out of the box, so bald fades and neck cleanups stop needing extra passes.\u003c\/li\u003e\n\u003cli\u003eGolden-titanium coated foil, per Andis, for a durable cutting surface.\u003c\/li\u003e\n\u003cli\u003eUltra-strong inner cutters handle stubble and hair of all types and textures.\u003c\/li\u003e\n\u003cli\u003eFoil assembly and cutters ship together, so you replace the whole wear system at once instead of chasing parts.\u003c\/li\u003e\n\u003cli\u003eGenuine Andis part, which means the fit is right the first time and your warranty stays intact.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAndis Item Number: 17280\u003c\/li\u003e\n\u003cli\u003eFoil Coating: Golden-titanium\u003c\/li\u003e\n\u003cli\u003eCompatible Shavers: Andis ProFoil Lithium Titanium Foil Shaver, Andis ProFoil Lithium Plus Titanium Foil Shaver\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTitanium foil assembly\u003c\/li\u003e\n\u003cli\u003eInner cutters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow often should I change the foil and cutters?\u003c\/h3\u003e\u003cp\u003eAndis does not publish a fixed replacement interval, so go by feel. When the shaver pulls, gets loud, or needs repeated passes over the same spot, the foil and cutters are done. Shops running skin fades all day burn through them faster than a stylist using the shaver a few times a week.\u003c\/p\u003e\u003ch3\u003eDoes this fit the Andis reSURGE shaver?\u003c\/h3\u003e\u003cp\u003eNo. The 17280 is for the ProFoil Lithium and ProFoil Lithium Plus shavers. The reSURGE uses its own foil and cutter kit.\u003c\/p\u003e\u003ch3\u003eDo I have to replace the foil and cutters together?\u003c\/h3\u003e\u003cp\u003eThey wear as a matched pair, which is why Andis sells them as one kit. Running a new foil against worn cutters, or the reverse, gives you an uneven cut and shortens the life of the new part.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eA worn foil is the number one reason a shaver that used to be a finisher becomes a paperweight. Keeping a spare 17280 in the drawer means a two-minute swap between clients instead of a lost afternoon and a new shaver on order.\u003c\/p\u003e\u003ch3\u003eAbout Andis\u003c\/h3\u003e\u003cp\u003eAndis has built professional clippers, trimmers and shavers in Racine, Wisconsin since 1922. The ProFoil line is its dedicated finishing shaver platform for barbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Andis","offers":[{"title":"Default Title","offer_id":39776766820394,"sku":"","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/F6317B6B-22C7-4219-BFFF-1241921E0226.webp?v=1697818354"},{"product_id":"andis-replacement-cutters-foil-copper","title":"Andis ProFoil Copper Replacement Foil \u0026 Cutters","description":"\u003cp\u003e\u003cstrong\u003eCopper titanium foil assembly, with the inner cutters.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the Andis ProFoil Copper lithium titanium foil assembly and inner cutters — the complete replacement head for the copper ProFoil Lithium shaver. Titanium foil in a copper finish, supplied with the cutters that sit behind it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper-finish titanium foil:\u003c\/strong\u003e Matched to the copper ProFoil shaver body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner cutters included:\u003c\/strong\u003e Both wearing parts replaced together, which is the only way to actually restore the cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Andis part:\u003c\/strong\u003e Built to the shaver's own tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap-on installation:\u003c\/strong\u003e Off and on by hand at the station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores the finish:\u003c\/strong\u003e Brings a tired shaver back to a one-pass bald fade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFoil: Lithium titanium, copper finish\u003c\/li\u003e\n\u003cli\u003eIncludes: Foil assembly and inner cutters\u003c\/li\u003e\n\u003cli\u003eFor: Andis ProFoil Copper lithium shaver\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eIs the foil gold or copper?\u003c\/h3\u003e\u003cp\u003eCopper. Andis lists this as the ProFoil Copper lithium titanium foil assembly. The gold-finish foils are a different part number.\u003c\/p\u003e\u003ch3\u003eAre the cutters included?\u003c\/h3\u003e\u003cp\u003eYes. This is the foil assembly and inner cutters together.\u003c\/p\u003e\u003ch3\u003eHow often should I replace it?\u003c\/h3\u003e\u003cp\u003eWhen the shave stops finishing in one pass or the head starts running hot. In a chair that does bald fades daily, that comes around faster than most barbers expect.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eA shaver head is a consumable, and pretending otherwise costs you clients with irritated necks. Keeping the copper assembly on the shelf means the tool is never the excuse.\u003c\/p\u003e\u003ch3\u003eAbout Andis\u003c\/h3\u003e\u003cp\u003eAndis has manufactured professional shavers, clippers, and replacement parts in Racine, Wisconsin since 1922.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Andis","offers":[{"title":"Default Title","offer_id":39914771415082,"sku":"","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/products\/1224A080-C73D-4A35-8156-73A76181572E.jpg?v=1644628905"},{"product_id":"babyliss-pro-ultra-thin-zero-gap-replacement-outliner-blade-fits-fits-all-fx787-models-fx707z","title":"BaBylissPRO Ultra-Thin Zero-Gap Replacement Outliner Blade #FX707Z – Fits All FX787 Models","description":"\u003cp\u003eThin steel, zero gap, and a line you can see land.\u003c\/p\u003e\u003cp\u003eThe BaBylissPRO FX707Z Ultra-Thin Zero-Gap Replacement Outliner Blade is a stainless steel T-blade for the FX787 skeleton trimmer family, including GoldFX, RoseFX and ChameleonFX. Thinness is the functional point — less blade body between your eye and the cutting edge means you can watch a hairline form instead of working blind. It is adjustable to zero gap for the closest possible cut.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClear view of the cutting edge from the ultra-thin blade profile\u003c\/li\u003e\n\u003cli\u003eClosest possible cut with adjustable zero-gap alignment\u003c\/li\u003e\n\u003cli\u003eRust resistance and lasting sharpness from stainless steel\u003c\/li\u003e\n\u003cli\u003eFits every FX787 skeleton outliner across the FX colour range\u003c\/li\u003e\n\u003cli\u003eQuick, correctly aligned installation with no adaptation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: FX707Z\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eProfile: Ultra-thin, zero-gap adjustable\u003c\/li\u003e\n\u003cli\u003eFits: All BaBylissPRO FX787 trimmers including GoldFX, RoseFX and ChameleonFX\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow do I zero-gap it safely?\u003c\/h3\u003e\u003cp\u003eLoosen the blade screws slightly, move the cutting blade forward in tiny increments until it sits level with the still blade, retighten evenly and test on your own arm first.\u003c\/p\u003e\u003ch3\u003eStainless or graphite blade for the FX787?\u003c\/h3\u003e\u003cp\u003eStainless resists rust and holds an edge; graphite-coated blades run cooler under heavy use. Which matters more depends on whether you line all day or do heavy beard work.\u003c\/p\u003e\u003ch3\u003eDoes zero-gapping void the warranty?\u003c\/h3\u003e\u003cp\u003eZero-gapping is a user adjustment, but it does move the blade closer to skin. Work carefully — an over-gapped blade will cut skin.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eUltra-thin means you can actually see the line as it happens. On a hairline, that is worth more than any other feature on the blade.\u003c\/p\u003e\u003ch3\u003eAbout BaBylissPRO\u003c\/h3\u003e\u003cp\u003eBaBylissPRO makes the FX skeleton trimmer range and its genuine replacement blades for professional barbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BaBylissPRO","offers":[{"title":"Default Title","offer_id":40671513018410,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/5CEF3EB1-680A-44E8-97F8-30EB05064EFE.webp?v=1697840292"},{"product_id":"babyliss-pro-fx3-replacement-t-blade-fx703b","title":"BaBylissPRO FX3 Replacement T-Blade #FX703B – Ultra-Thin DLC\/Titanium Standard Tooth Blade","description":"\u003cp\u003eThe titanium carbon-nitride standard-tooth blade for the FX3 trimmer.\u003c\/p\u003e\u003cp\u003eThe BaBylissPRO FX703B is the ultra-thin, standard-tooth replacement T-blade for the FX3 trimmer, finished in titanium carbon-nitride. It is a direct swap that puts a worn FX3 back to factory cutting performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStandard tooth spacing is what you want for clean lineups and finishing rather than beard bulk.\u003c\/li\u003e\n\u003cli\u003eUltra-thin profile lets the blade get in tight along a hairline where a thicker blade cannot sit flat.\u003c\/li\u003e\n\u003cli\u003eTitanium carbon-nitride is a hard surface treatment that resists wear and corrosion better than bare steel.\u003c\/li\u003e\n\u003cli\u003eDirect FX3 fitment, so nothing about your trimmer setup changes when you swap it.\u003c\/li\u003e\n\u003cli\u003eChanging the blade is faster and far cheaper than replacing a trimmer that has simply gone dull.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: FX703B\u003c\/li\u003e\n\u003cli\u003eFinish: Titanium carbon-nitride\u003c\/li\u003e\n\u003cli\u003eProfile: Ultra-thin\u003c\/li\u003e\n\u003cli\u003eTooth pattern: Standard tooth\u003c\/li\u003e\n\u003cli\u003eFits: BaBylissPRO FX3 trimmer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eIs this a DLC blade?\u003c\/h3\u003e\u003cp\u003eNo. BaBylissPRO and its authorised retailers specify the FX703B as titanium carbon-nitride, not diamond-like carbon. The two are different coatings and often get confused.\u003c\/p\u003e\u003ch3\u003eStandard tooth or deep tooth?\u003c\/h3\u003e\u003cp\u003eStandard tooth. If you want more aggressive feed for beard bulk, that is a different blade.\u003c\/p\u003e\u003ch3\u003eWill it fit anything besides the FX3?\u003c\/h3\u003e\u003cp\u003eIt is specified as the FX3 replacement T-blade. Match the blade to your trimmer model before ordering.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eAn FX3 with a fresh standard-tooth blade cuts a line in one pass again. It is the cheapest way to get that back.\u003c\/p\u003e\u003ch3\u003eAbout BaBylissPRO\u003c\/h3\u003e\u003cp\u003eBaBylissPRO is a professional grooming brand whose FX trimmer line and coated replacement blades are shop standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BaBylissPRO","offers":[{"title":"Default Title","offer_id":40671522553898,"sku":"","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/02C28A43-C74A-47CC-A5C3-3135E1ACB175.webp?v=1697840615"},{"product_id":"wezteck-one-blade","title":"WezTeck One Blade – Universal Precision Clipper Blade for Faster Fades","description":"\u003cp\u003eChange lengths without changing guards.\u003c\/p\u003e\n\u003cp\u003eThe WezTeck One Blade is an adjustable clipper blade system that lets a barber move between cutting lengths from the blade itself rather than stopping to swap guard combs. Fewer guard changes means fewer breaks in rhythm on a fade, and less time spent hunting for the size you need. It is aimed at barbers who want to work faster without giving up control over length.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFewer interruptions per fade\u003c\/strong\u003e — adjust on the tool instead of reaching for a guard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoother transitions\u003c\/strong\u003e — moving through lengths continuously reduces hard steps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster services\u003c\/strong\u003e — the time saved on guard changes adds up across a full book.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess to carry\u003c\/strong\u003e — one blade covers what several guards would.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent control\u003c\/strong\u003e over length throughout the cut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\n\u003ch3\u003eDoes it replace my guards entirely?\u003c\/h3\u003e\n\u003cp\u003eNot entirely — most barbers still keep guards for the longer lengths. The blade covers the short and mid range where guard changes slow you down most.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my clipper?\u003c\/h3\u003e\n\u003cp\u003eCheck compatibility against your specific clipper model before ordering. Adjustable blade systems are not universal across every machine.\u003c\/p\u003e\n\u003ch3\u003eHow do I maintain it?\u003c\/h3\u003e\n\u003cp\u003eSame as any clipper blade — brush, disinfect, dry and oil. Keep the adjustment mechanism free of packed hair so it moves cleanly.\u003c\/p\u003e\n\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\n\u003cp\u003eGuard changes are dead time repeated dozens of times a day. Anything that removes them without costing you accuracy pays for itself quickly.\u003c\/p\u003e\n\u003ch3\u003eAbout WezTeck\u003c\/h3\u003e\n\u003cp\u003eWezTeck produces barbering blade systems and cutting tools aimed at speeding up fade and blend work behind the chair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WezTeck","offers":[{"title":"Default Title","offer_id":41006051426346,"sku":"","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/IMG_4175.webp?v=1707884952"},{"product_id":"andis-master-dual-magnet-0-comb-the-sought-after-og-size-fits-ml-mlc-models-561385","title":"Andis Master Dual Magnet #0 Guard – OG Size 0 Precision Fade Comb 1\/16\"","description":"\u003cp\u003eThe OG size 0 that fade barbers hunt for.\u003c\/p\u003e\u003cp\u003eThe Andis Master Dual Magnet #0 Comb #561385 is a 1\/16\" magnetic attachment guard for corded and cordless Andis Master clippers, built with eleven extended tines to feed hair into the blade more evenly. Extended tines are what separate a guard that blends from a guard that pushes hair around — they lift and present the hair rather than flattening it. A dual magnet system holds it locked through heavy passes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTight, seamless fades at the classic 1\/16\" size\u003c\/li\u003e\n\u003cli\u003eSmoother feeding and cleaner blending from eleven extended tines\u003c\/li\u003e\n\u003cli\u003eStays locked under pressure thanks to the dual magnet mount\u003c\/li\u003e\n\u003cli\u003eOne guard covers both corded ML and cordless MLC Masters\u003c\/li\u003e\n\u003cli\u003eFast, one-handed attachment and removal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 561385\u003c\/li\u003e\n\u003cli\u003eSize: #0\u003c\/li\u003e\n\u003cli\u003eCutting length: 1\/16\" (1.5 mm)\u003c\/li\u003e\n\u003cli\u003eTines: 11 extended\u003c\/li\u003e\n\u003cli\u003eFits: Andis Master ML (corded) and MLC (cordless)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhy do barbers specifically want the OG size 0?\u003c\/h3\u003e\u003cp\u003eBecause it sits exactly where a fade needs its first guard step. Sizes above it leave too much, and going straight to the blade leaves a line.\u003c\/p\u003e\u003ch3\u003eDo the magnets weaken over time?\u003c\/h3\u003e\u003cp\u003eThe dual magnet system is designed to hold through daily use. Keep the mating surfaces free of packed hair — debris between the guard and the blade is what causes a guard to sit loose.\u003c\/p\u003e\u003ch3\u003eWill it fit an Andis Fade Master?\u003c\/h3\u003e\u003cp\u003eIt is specified for the Master ML and MLC. Check your model before ordering, since Andis guard mounts differ across the range.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the guard that makes the first step of the fade disappear. Once you have cut with the extended tines you notice immediately when you go back to a standard guard.\u003c\/p\u003e\u003ch3\u003eAbout Andis\u003c\/h3\u003e\u003cp\u003eAndis has manufactured professional clippers, blades and attachment guards for barbers since 1922.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Andis","offers":[{"title":"Default Title","offer_id":41522048860202,"sku":"","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Photoroom_000_20240427_162516.jpg?v=1714250056"},{"product_id":"derby-extra-double-edge-razor-blades-100-blades-pk","title":"Derby Extra Double Edge Razor Blades – 100 Pack Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eThe double-edge blade barbershops buy a hundred at a time.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDerby Extra double edge razor blades are Turkish-made stainless blades finished with a chromium-ceramic, platinum, tungsten and polymer coating. This is the 100-blade professional pack, sized for a shop that shaves every day.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-layer coating:\u003c\/strong\u003e Chromium-ceramic, platinum, tungsten and polymer — the reason a Derby Extra keeps its edge past the first pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolymer coated edge:\u003c\/strong\u003e Smoother glide on the second and third pass, which is where irritation usually starts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal double edge fit:\u003c\/strong\u003e Works in any standard DE safety razor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 blades per pack:\u003c\/strong\u003e Shop quantity at shop pricing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Turkey:\u003c\/strong\u003e Derby has produced blades there for decades and the consistency shows blade to blade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Double edge\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eCoating: Chromium-ceramic, platinum, tungsten, polymer\u003c\/li\u003e\n\u003cli\u003eQuantity: 100 blades\u003c\/li\u003e\n\u003cli\u003eOrigin: Turkey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWill these fit my razor?\u003c\/h3\u003e\u003cp\u003eYes, if it takes a standard double edge blade. The DE format has not changed in a century.\u003c\/p\u003e\u003ch3\u003eHow many coatings are on the edge?\u003c\/h3\u003e\u003cp\u003eDerby applies chromium-ceramic, platinum, tungsten and polymer.\u003c\/p\u003e\u003ch3\u003eAre these the same as Derby Premium?\u003c\/h3\u003e\u003cp\u003eNo. Derby produces several lines. This listing is Derby Extra in the double edge format.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eDerby Extra is the default for a reason: it is forgiving on the first shave of the day and consistent enough that you are not re-learning your angle every time you change blades. At 100 to a box you stop thinking about blade supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Derby","offers":[{"title":"Default Title","offer_id":42743061053482,"sku":"","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Derby_Extra_Double_Edge_Razor_Blades_100_Blades_pk.jpg?v=1744859901"},{"product_id":"derby-extra-double-edge-razor-blades-100-blades-pk-copy","title":"Derby Professional Single Edge Razor Blades – 100 Pack Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eSingle edge, ready to load — no snapping blades in half.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDerby Professional single edge razor blades come 100 to a pack, made in Turkey with a chromium-ceramic, platinum, tungsten and polymer coating. They load straight into a shavette or straight-razor holder with no splitting required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue single edge format:\u003c\/strong\u003e Skip the step of snapping a DE blade in two and getting an uneven edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-layer coating:\u003c\/strong\u003e Chromium-ceramic, platinum, tungsten and polymer for edge life and glide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 blades per pack:\u003c\/strong\u003e Enough to stop rationing blades between clients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Turkey:\u003c\/strong\u003e Derby's own production, not a rebadge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbershop staple:\u003c\/strong\u003e A long-standing favourite among single edge shavers and professional barbers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Single edge\u003c\/li\u003e\n\u003cli\u003eCoating: Chromium-ceramic, platinum, tungsten, polymer\u003c\/li\u003e\n\u003cli\u003eQuantity: 100 blades\u003c\/li\u003e\n\u003cli\u003eOrigin: Turkey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eDo I need to break these in half?\u003c\/h3\u003e\u003cp\u003eNo. They ship in single edge format, ready to load.\u003c\/p\u003e\u003ch3\u003eWhat razors take them?\u003c\/h3\u003e\u003cp\u003eProfessional single edge shavettes and straight-razor style holders that accept a full single edge blade.\u003c\/p\u003e\u003ch3\u003eWhere are they made?\u003c\/h3\u003e\u003cp\u003eTurkey.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eSnapping DE blades wastes seconds and produces uneven halves that catch on a neckline. Loading a purpose-made single edge means the same clean edge every client, every time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Derby","offers":[{"title":"Default Title","offer_id":42743088742442,"sku":"","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/DERBY_PROFESSIONAL_SINGLE_EDGE_BLADES_-_100_BLADES.jpg?v=1744861238"},{"product_id":"dorco-double-edge-blades-self-dispensing-d212-st-301","title":"Dorco Double Edge Razor Blades ST-301 – 100 Count Self-Dispensing Box","description":"\u003cp\u003eA hundred blades that hand themselves to you one at a time.\u003c\/p\u003e\u003cp\u003eDorco ST-301 double edge razor blades are stainless steel DE blades in a 100-count self-dispensing box. The dispenser is the practical part — you pull one blade at a time without handling the stack, and used blades go into the back of the box instead of loose in a bin. Standard DE sizing fits any safety razor and snaps for shavette use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer handling\u003c\/strong\u003e — self-dispensing packaging means you never fish a loose blade out of a box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh edge per client\u003c\/strong\u003e — 100 blades makes single-use the obvious choice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits any DE razor\u003c\/strong\u003e — standard double edge sizing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks in a shavette\u003c\/strong\u003e — snap in half for barber straight razor holders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel\u003c\/strong\u003e — clean, low-irritation passes on the neck.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade type:\u003c\/strong\u003e Double edge (DE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 100 blades, self-dispensing box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ST-301\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow do the used blades get disposed of?\u003c\/h3\u003e\u003cp\u003eThe self-dispensing box has a return slot at the back, so used blades stay contained until the box is full and goes in a sharps bin.\u003c\/p\u003e\u003ch3\u003eAre Dorco blades sharp or mild?\u003c\/h3\u003e\u003cp\u003eThe ST-301 sits in the everyday range — sharp enough to cut clean, forgiving enough for a client with sensitive skin.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eCheap enough to never reuse a blade, packaged so nobody in the shop gets cut restocking.\u003c\/p\u003e\u003ch3\u003eAbout Dorco\u003c\/h3\u003e\u003cp\u003eDorco is a long-established razor blade manufacturer supplying barbers and wet shavers worldwide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dorco","offers":[{"title":"Pack","offer_id":42752566853674,"sku":"","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Box","offer_id":42752566886442,"sku":"","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Dorco_Double_Edge_Blades_Self_Dispensing_D212_ST-301.webp?v=1745257918"},{"product_id":"dorco-double-edge-blades-self-dispensing-d212-st-301-copy","title":"Dorco Prime Platinum Double Edge Blades STP-301 – 100 Count","description":"\u003cp\u003eThe smoother Dorco, for the client whose neck complains.\u003c\/p\u003e\u003cp\u003eDorco STP-301 Prime Platinum double edge blades use a double-coating process and an ultra-fine edge, sold in a 100-count box. The coating is what you feel: less drag on the pass, which matters most on necklines and around ingrown-prone areas where a bare edge tugs. Standard DE format fits any safety razor and snaps for shavette work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess pull on sensitive skin\u003c\/strong\u003e — the double coating reduces friction through the pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine, clean edge\u003c\/strong\u003e — cuts hair rather than pushing it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 per box\u003c\/strong\u003e — fresh blade every client without thinking about cost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal fit\u003c\/strong\u003e — standard double edge sizing for any DE razor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShavette ready\u003c\/strong\u003e — snaps cleanly in half.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade type:\u003c\/strong\u003e Double edge (DE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge:\u003c\/strong\u003e Double-coated, ultra-fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 100 blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e STP-301\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow is STP-301 different from ST-301?\u003c\/h3\u003e\u003cp\u003eSTP-301 is the platinum-coated version. The coating makes the pass smoother, which most barbers notice on the neckline first.\u003c\/p\u003e\u003ch3\u003eDo coated blades last longer?\u003c\/h3\u003e\u003cp\u003eThey tend to stay comfortable a little longer, but in a shop you should still be changing per client regardless.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eWhen a regular tells you your shaves burn, this is usually the cheapest thing that fixes it.\u003c\/p\u003e\u003ch3\u003eAbout Dorco\u003c\/h3\u003e\u003cp\u003eDorco manufactures razors and blades supplied to barbershops and wet shavers worldwide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dorco","offers":[{"title":"Pack","offer_id":42752581992490,"sku":"","price":10.99,"currency_code":"USD","in_stock":true},{"title":"Box","offer_id":42752582025258,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/DORCO_STP-301_BLUE_PRIME_PLATINUM_DOUBLE_EDGE_RAZOR_BLADES_-_100_BLADES.webp?v=1745258584"},{"product_id":"astra-superior-stainless-double-edge-blades-100-blades","title":"Astra Superior Stainless Double Edge Blades – 100 Count Barber Pack","description":"\u003cp\u003eThe blade wet shavers argue least about.\u003c\/p\u003e\u003cp\u003eAstra Superior Stainless double edge razor blades are a barbershop staple, sold here in a 100-count pack. They sit in the middle of the DE blade spectrum — sharp enough to cut cleanly on the first pass, forgiving enough that they do not punish a client with sensitive skin. Standard double-edge sizing fits any DE safety razor, and each blade snaps in half for shavette use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh blade, every client\u003c\/strong\u003e — 100 blades makes single-use the obvious choice for shave services.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComfortable on sensitive skin\u003c\/strong\u003e — a smooth, moderately aggressive edge reduces irritation on the neck.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits everything\u003c\/strong\u003e — standard DE format works in any double-edge safety razor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap for shavette use\u003c\/strong\u003e — split in half for barber straight razor holders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel\u003c\/strong\u003e — holds an edge through a full shave without dragging.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade type:\u003c\/strong\u003e Double edge (DE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack size:\u003c\/strong\u003e 100 blades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eAre Astra blades sharp or mild?\u003c\/h3\u003e\u003cp\u003eThey sit toward the smooth end. Barbers who find Feather blades too aggressive on a client's neck usually land on Astra as the everyday blade.\u003c\/p\u003e\u003ch3\u003eWill they fit my shavette?\u003c\/h3\u003e\u003cp\u003eYes. Snap the blade in half along its centre line and load one half into your straight razor holder.\u003c\/p\u003e\u003ch3\u003eHow many shaves per blade?\u003c\/h3\u003e\u003cp\u003eIn a shop, one client per blade. Personal wet shavers commonly get several shaves, but there is no reason to reuse on a paying customer.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eConsistency. Box after box, Astra blades feel the same, which is exactly what you want when you are putting steel on someone's throat.\u003c\/p\u003e\u003ch3\u003eAbout Astra\u003c\/h3\u003e\u003cp\u003eAstra is a long-established double edge razor blade brand widely used in barbershops and by wet shavers worldwide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Astra","offers":[{"title":"Default Title","offer_id":42752602079274,"sku":"","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/ASTRA_SUPERIOR_STAINLESS_DOUBLE_EDGE_BLADES_-_100_BLADES.webp?v=1745259033"},{"product_id":"diane-double-edge-blades-100pk-dvb001","title":"Diane Double Edge Razor Blades 100pk #DVB001 – Swedish Stainless Steel","description":"\u003cp\u003eA hundred fresh edges, so nobody gets a second-day blade.\u003c\/p\u003e\u003cp\u003eDiane Double Edge Razor Blades #DVB001 are professional double-edge blades made from Swedish stainless steel, sold in a 100-blade box. They fit any standard double-edge safety razor and snap in half for use in a shavette or barber straight razor. At this count they are a consumables item rather than a purchase — you change the blade every client and stop thinking about it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever stretch a blade\u003c\/strong\u003e — a 100-count box makes a fresh edge per client the cheap option, not the careful one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, low-drag passes\u003c\/strong\u003e — Swedish stainless steel holds a keen edge through a full shave without tugging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits what you already own\u003c\/strong\u003e — standard double-edge sizing works in any DE safety razor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks in your shavette\u003c\/strong\u003e — snap in half for barber-style straight razor holders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually wrapped\u003c\/strong\u003e — each blade stays sealed and sanitary until you load it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade type:\u003c\/strong\u003e Double edge (DE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Swedish stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack size:\u003c\/strong\u003e 100 blades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWill these fit my shavette?\u003c\/h3\u003e\u003cp\u003eYes. Double-edge blades snap cleanly in half along the center, and each half fits a standard barber straight razor holder.\u003c\/p\u003e\u003ch3\u003eHow often should I change the blade?\u003c\/h3\u003e\u003cp\u003eFor barbershop work, once per client. There is no upside to reusing a blade on a paying customer, and at 100 per box there is no reason to.\u003c\/p\u003e\u003ch3\u003eAre these the same as Astra or Feather blades?\u003c\/h3\u003e\u003cp\u003eThey are the same standard DE format, so they fit the same razors. Every DE blade brand has a slightly different feel — Diane sits in the everyday, forgiving range rather than the ultra-aggressive end.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eBlades are the one thing you never want to run out of mid-shift. A 100-pack in the drawer means the shave service never stops.\u003c\/p\u003e\u003ch3\u003eAbout Diane\u003c\/h3\u003e\u003cp\u003eDiane has supplied barbershops and salons for decades with combs, brushes, shaving supplies and everyday professional tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diane","offers":[{"title":"Default Title","offer_id":42754650144810,"sku":null,"price":6.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/IMG_5284.jpg?v=1745336139"},{"product_id":"derby-premium-single-edge-razor-blades","title":"Derby Premium Single Edge Razor Blades – Comfort Coated 100pk","description":"\u003cp\u003e\u003cstrong\u003ePolymer-coated single edge blades, 100 to the box.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDerby Premium single edge razor blades are Turkish-made and built on a chromium-ceramic-platinum-tungsten blade with polymer coated edges. Each pack holds 100 blades for shop-volume use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolymer coated edges:\u003c\/strong\u003e Smoother glide across a lineup or a neck shave with less drag on the skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChromium-ceramic-platinum-tungsten construction:\u003c\/strong\u003e The multi-element edge that keeps a blade sharp beyond a single client.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle edge format:\u003c\/strong\u003e Loads directly — no halving a DE blade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-blade pack:\u003c\/strong\u003e Priced and packed for a working barbershop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Turkey:\u003c\/strong\u003e Derby's own production line.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Single edge\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromium-ceramic-platinum-tungsten\u003c\/li\u003e\n\u003cli\u003eCoating: Polymer coated edges\u003c\/li\u003e\n\u003cli\u003eQuantity: 100 blades\u003c\/li\u003e\n\u003cli\u003eOrigin: Turkey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow is Premium different from Derby Professional?\u003c\/h3\u003e\u003cp\u003eThey are separate Derby lines. Premium is specified as chromium-ceramic-platinum-tungsten with polymer coated edges; Professional carries the same coating stack described slightly differently. Both come 100 to a pack.\u003c\/p\u003e\u003ch3\u003eAre these pre-cut single edge blades?\u003c\/h3\u003e\u003cp\u003eThey ship as single edge blades. Confirm the holder you run takes a full single edge before ordering.\u003c\/p\u003e\u003ch3\u003eWhere are they manufactured?\u003c\/h3\u003e\u003cp\u003eTurkey.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eA polymer edge is what separates a shave a client barely notices from one that leaves a burn. Buying by the hundred means you change blades because you should, not because you are down to the last few.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Derby","offers":[{"title":"Default Title","offer_id":42755099787306,"sku":"","price":5.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/DERBY_PREMIUM_SINGLE_EDGE_RAZOR_BLADE.jpg?v=1745359042"},{"product_id":"babyliss-replacement-premium-guard-attachments-8pc-fxpcg","title":"BaByliss Premium Replacement Guard Attachments 8pc – FXPCG Fade Set","description":"\u003cp\u003eEight guards that hold their length instead of flexing off it.\u003c\/p\u003e\u003cp\u003eThe BaByliss Premium Replacement Guard Attachment Set #FXPCG is an eight-piece comb set moulded in fiberglass-reinforced nylon with a metal clip. The reinforced nylon matters under pressure — a guard that flexes as you push through thick hair changes length mid-pass, which is where uneven fades come from. The metal clip keeps the guard locked to the blade instead of creeping.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent length under pressure\u003c\/strong\u003e — fiberglass-reinforced nylon resists the flex that makes cuts uneven.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked to the blade\u003c\/strong\u003e — a metal clip holds position through a full pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull working range\u003c\/strong\u003e — eight graded sizes cover fades, tapers and bulk removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth hair feed\u003c\/strong\u003e — the tooth profile guides hair into the blade cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces what you have lost\u003c\/strong\u003e — a complete set to rebuild a scattered guard collection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePieces:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fiberglass-reinforced nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Metal clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e FXPCG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhy do guards need reinforcing?\u003c\/h3\u003e\u003cp\u003eBecause you push. Plain nylon flexes under hand pressure and the effective length changes, which shows up as lines and steps in a fade. Reinforced material holds its shape.\u003c\/p\u003e\u003ch3\u003eWill these fit my BaBylissPRO clipper?\u003c\/h3\u003e\u003cp\u003eThey are cut for BaBylissPRO clipper blade profiles. Check your clipper's blade shape before ordering, particularly if you run a mixed kit.\u003c\/p\u003e\u003ch3\u003eMetal clip versus plastic — does it matter?\u003c\/h3\u003e\u003cp\u003eYes. Plastic clips are the first thing to break in a full barber bag, and a broken clip means a guard that walks off the blade mid-cut.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eGuards are how you deliver the same haircut twice. Eight solid ones for the price of a tank of gas is an easy call.\u003c\/p\u003e\u003ch3\u003eAbout BaBylissPRO\u003c\/h3\u003e\u003cp\u003eBaBylissPRO makes professional clippers, trimmers, shavers and cutting accessories for barbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BaBylissPRO","offers":[{"title":"Default Title","offer_id":42757907120170,"sku":"","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/BABYLISS_REPLACEMENT_PREMIUM_GUARD_ATTACHMENTS_-_8PC._FXPCG.webp?v=1745456240"},{"product_id":"andis-master-7-pcs-attachment-comb-set-01380","title":"Andis Master Attachment Comb Set #01380 – 7pc Snap-On Guards","description":"\u003cp\u003eSeven lengths, one clipper, no guesswork.\u003c\/p\u003e\u003cp\u003eThe Andis Master 7-Piece Snap-On Attachment Comb Set #01380 gives you sizes 0, 1, 2, 3, 4, 6 and 8 for the Andis Master clipper. That range covers everything from a tight guard fade through scissor-length bulk removal, so one clipper handles a full haircut without a blade change. Each comb snaps positively onto the blade and stays put through the pass.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull length range in one set\u003c\/strong\u003e — 0 through 8 covers short fades to long bulk work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStays locked on\u003c\/strong\u003e — the snap-on fit holds firmly so lengths stay honest across the head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatable results\u003c\/strong\u003e — the same guard number gives the same length on every return client.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks on every texture\u003c\/strong\u003e — the graded range handles fine, coarse and curly hair alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for the Master\u003c\/strong\u003e — shaped for the Andis Master blade rather than generic sizing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePieces:\u003c\/strong\u003e 7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 0, 1, 2, 3, 4, 6, 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Snap-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Andis Master clippers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Andis #01380\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhy are there no 5 and 7 guards?\u003c\/h3\u003e\u003cp\u003eAndis ships the common working sizes in this set. Most barbers bridge the gaps with the clipper's blade lever or with a scissor-over-comb pass rather than carrying every number.\u003c\/p\u003e\u003ch3\u003eSnap-on or magnetic — which should I buy?\u003c\/h3\u003e\u003cp\u003eSnap-on guards are cheaper and hold well; magnetic guards come off and on faster. If you change guards constantly during a fade, magnets are worth it. If you set one length and cut, snap-ons are fine.\u003c\/p\u003e\u003ch3\u003eWill these fit an Andis Fade or Envy?\u003c\/h3\u003e\u003cp\u003eThey are cut for the Master blade profile. Check your blade shape before assuming fit on other Andis models.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eA complete guard set is the difference between cutting what the client asked for and cutting what you have on hand.\u003c\/p\u003e\u003ch3\u003eAbout Andis\u003c\/h3\u003e\u003cp\u003eAndis has manufactured professional clippers, blades and attachments since 1922.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Andis","offers":[{"title":"Default Title","offer_id":42784728580138,"sku":"","price":10.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Andis_Master_7_Pcs_Attachment_Comb_Set_01380.jpg?v=1746670834"},{"product_id":"andis-23575-set-of-4-clipper-attachment-combs-set-fits-t-outliner-superliner","title":"Andis T-Outliner Attachment Combs #23575 – 4-Piece T-Blade Guide Set","description":"\u003cp\u003eGuards that actually fit a T-blade.\u003c\/p\u003e\u003cp\u003eThe Andis #23575 attachment comb set is a four-piece guide kit made specifically for T-blade trimmers — the Andis T-Outliner and Superliner. Standard clipper guards do not fit a T-blade properly because the blade is wider and squared off; these are cut to match it, so they sit flat and glide instead of rocking. The set covers 1\/16\", 1\/8\", 1\/4\" and 3\/8\".\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent length off a trimmer\u003c\/strong\u003e — four graded guides turn an outliner into a short-length cutting tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the blade you own\u003c\/strong\u003e — shaped for Andis T-Outliner and Superliner T-blades, not generic clipper blades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth passes\u003c\/strong\u003e — the flat T-profile keeps the guard seated instead of tipping mid-stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for beards and detail\u003c\/strong\u003e — the short size range is exactly where beard work and edging live.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour sizes, one small case-friendly set\u003c\/strong\u003e — no bulk added to the bag.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePieces:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 1\/16\", 1\/8\", 1\/4\", 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Andis T-Outliner and Superliner T-blades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWill these fit my regular clipper?\u003c\/h3\u003e\u003cp\u003eNo. They are cut for T-blades. A standard clipper blade is a different shape and the guard will not seat correctly.\u003c\/p\u003e\u003ch3\u003eWhat are they used for?\u003c\/h3\u003e\u003cp\u003eMostly beard length work and short taper detailing — anywhere you want a repeatable short length off a trimmer instead of freehanding it.\u003c\/p\u003e\u003ch3\u003eDo they fit the cordless T-Outliner Li?\u003c\/h3\u003e\u003cp\u003eThey are made for the Andis T-blade profile used on the T-Outliner and Superliner. If your trimmer runs that same T-blade, they seat the same way.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eFreehanding a beard with a bare T-blade is how you take too much off. Four guides remove the guesswork on the client who wants the same beard every time.\u003c\/p\u003e\u003ch3\u003eAbout Andis\u003c\/h3\u003e\u003cp\u003eAndis has built professional clippers, trimmers and blades since 1922 and is a fixture in barbershops worldwide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Andis","offers":[{"title":"Default Title","offer_id":42784730710058,"sku":"","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/ANDIS_23575_Set_of_4_Clipper_Attachment_Combs_Set_FITS_T-Outliner_Superliner.jpg?v=1746671429"},{"product_id":"andis-23575-set-of-4-clipper-attachment-combs-set-fits-t-outliner-superliner-copy","title":"Oster Universal Clipper Comb Set 10pc – Blended Cuts, Pro Guide Kit","description":"\u003cp\u003eTen lengths, one pouch, less scissor work.\u003c\/p\u003e\u003cp\u003eThe Oster Universal Clipper Comb Set is a 10-piece guide comb kit covering cutting lengths from 1\/16\" through 1-1\/4\", supplied in a soft storage pouch. Ten sizes is what turns guard work into real blending — the gaps between lengths are small enough to step a taper cleanly instead of leaving a shelf. The combs lock on with rounded edges so they seat quickly and stay put.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmoother blends because ten lengths leave smaller steps between guards\u003c\/li\u003e\n\u003cli\u003eLess scissor work needed after the clipper passes\u003c\/li\u003e\n\u003cli\u003eSecure attachment that holds through a full pass\u003c\/li\u003e\n\u003cli\u003eGuards stay together and undamaged in the included pouch\u003c\/li\u003e\n\u003cli\u003eWide fit across full-size detachable and adjustable-blade clippers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePieces: 10\u003c\/li\u003e\n\u003cli\u003eSizes: 1\/16\" (0), 1\/8\" (1), 1\/4\" (2), 3\/8\" (3), 1\/2\" (4), 5\/8\" (5), 3\/4\" (6), 7\/8\" (7), 1\" (8), 1-1\/4\" (10)\u003c\/li\u003e\n\u003cli\u003eFits: Full-size clippers including Oster Classic 76, Powerline, Titan, Turbo 111 and A5, plus many full-size Wahl clippers\u003c\/li\u003e\n\u003cli\u003eNot compatible with: Trimmers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 guide combs\u003c\/li\u003e\n\u003cli\u003eStorage pouch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWill these fit my trimmer?\u003c\/h3\u003e\u003cp\u003eNo. The set is cut for full-size clipper blades. Trimmers need their own smaller guard sets.\u003c\/p\u003e\u003ch3\u003eWhat does the 1-1\/4\" guard get used for?\u003c\/h3\u003e\u003cp\u003eBulk removal on longer styles and heavy heads. It is the size most eight-piece sets leave out, and it saves a lot of scissor work when you need it.\u003c\/p\u003e\u003ch3\u003eHow do I stop guards cracking?\u003c\/h3\u003e\u003cp\u003eLift them straight off the blade rather than twisting, and keep them out of hot water. Most guard failures are handling, not wear.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eTen sizes in a pouch beats eight sizes scattered across a station. The extra lengths at both ends of the range are the ones you miss when you do not have them.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster has manufactured professional clippers and cutting attachments for the barber trade for decades, with the Classic 76 among the longest-running professional clippers in production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42784733167658,"sku":"","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_COMB_SET_10_PC_UNIVERSAL_W_Pouch_076926-900.jpg?v=1746672100"},{"product_id":"wahl-professional-5-star-series-replacement-foil-red-gold-7031-200","title":"Wahl 5-Star Replacement Foil Red \u0026 Gold #7031-200 – Razor Close Finish","description":"\u003cp\u003eA fresh gold foil brings the super-close finish straight back.\u003c\/p\u003e\u003cp\u003eThe Wahl 5 Star Replacement Foil #7031-200 is the genuine super-close gold foil for the Wahl 5 Star Shaver\/Shaper. The foil is the part that sits against skin, and once it thins or dents, the shave stops being close and starts being uncomfortable. This is the foil on its own, so it is the right part when your cutter still has life in it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReturns the shaver to its super-close finish on balds and cleanup work\u003c\/li\u003e\n\u003cli\u003eGold foil designed to shave tight without irritating the skin\u003c\/li\u003e\n\u003cli\u003eCost-effective service when the cutter is still sharp\u003c\/li\u003e\n\u003cli\u003eGenuine Wahl part made to the shaver's original tolerances\u003c\/li\u003e\n\u003cli\u003eFits without adjustment on the 5 Star Shaver\/Shaper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 7031-200\u003c\/li\u003e\n\u003cli\u003eContents: Replacement foil only — no cutter bar\u003c\/li\u003e\n\u003cli\u003eFoil: Super close, gold\u003c\/li\u003e\n\u003cli\u003eFits: Wahl 5 Star Shaver\/Shaper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eDoes this include the cutter bar?\u003c\/h3\u003e\u003cp\u003eNo. The 7031-200 is the foil on its own. If your cutter is also worn, the foil and cutter bar assembly (#7031-100) is the part you want.\u003c\/p\u003e\u003ch3\u003eWhen should I replace just the foil?\u003c\/h3\u003e\u003cp\u003eWhen the foil is dented, polished thin or torn but the shave still feels sharp rather than tugging. Tugging usually points to a worn cutter.\u003c\/p\u003e\u003ch3\u003eHow do I avoid damaging a new foil?\u003c\/h3\u003e\u003cp\u003eDo not press hard into the skin, brush the head out after each client, and never set the shaver down face-first. Most foils die from impact, not from cutting.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the cheapest fix in the shave kit. Two minutes and a new foil, and the finishing pass feels like the shaver did when it was new.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional has manufactured barber shavers and genuine replacement foils and cutters since 1919.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42785459241002,"sku":null,"price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/WAHL_PROFESSIONAL_5-STAR_SERIES_-_REPLACEMENT_FOIL_-_RED_GOLD_7031-200.jpg?v=1746706159"},{"product_id":"andis-master-replacement-blade-01556","title":"Andis Master Replacement Blade #01556 – Adjustable Carbon Steel Blade","description":"\u003cp\u003e\u003cstrong\u003eThe #22 blade that puts a Master back to work.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Andis Master Replacement Blade #01556 is the size 000-1 adjustable carbon-steel blade for the Master and MLX clippers. It is the size #22 blade, and it restores the fade range the Master was built around.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjusts 000 to 1:\u003c\/strong\u003e The whole working fade range on one blade, moved with a thumb lever.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon steel:\u003c\/strong\u003e The material Andis has used on Master blades for decades, and the reason they hold an edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize #22:\u003c\/strong\u003e The standard Master blade designation, so you are ordering the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Master and MLX:\u003c\/strong\u003e Direct replacement for the clippers it was designed for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores the cut:\u003c\/strong\u003e A dull Master feels like a different clipper; a fresh blade fixes it for a fraction of a new machine.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 000-1 adjustable (#22)\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbon steel\u003c\/li\u003e\n\u003cli\u003eFits: Andis Master and MLX clippers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhat range does it adjust through?\u003c\/h3\u003e\u003cp\u003e000 to 1.\u003c\/p\u003e\u003ch3\u003eWhich clippers does it fit?\u003c\/h3\u003e\u003cp\u003eAndis lists it as the Master\/MLX replacement blade. Check your model designation before ordering.\u003c\/p\u003e\u003ch3\u003eHow do I know when to replace?\u003c\/h3\u003e\u003cp\u003eWhen the clipper starts pulling or the lever no longer changes the cut cleanly. Both mean the blade set has worn out of alignment.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eA Master with a worn blade gets blamed for being a bad clipper. Nine times out of ten it is the blade, and a #22 puts it right for the price of a haircut.\u003c\/p\u003e\u003ch3\u003eAbout Andis\u003c\/h3\u003e\u003cp\u003eAndis has manufactured professional clipper blades in Racine, Wisconsin since 1922.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Andis","offers":[{"title":"Default Title","offer_id":42791255572522,"sku":"","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Andis-master-replacement-blade-22.jpg?v=1767869376"},{"product_id":"andis-fade-master-blade-01591","title":"Andis Fade Master Replacement Blade #01591 – Adjustable Ultra-Close Fade","description":"\u003cp\u003eSkin-close at one end of the lever, blendable at the other.\u003c\/p\u003e\u003cp\u003eThe Andis Fade Master Replacement Blade #01591 is an adjustable carbon steel fade blade that runs from size 00000 to size 000, fitting the Andis Master and Fade Master clippers. At its closest setting it leaves hair at 1\/150 of an inch, which is what makes a genuine skin fade possible without switching to a shaver. The lever range then gives you somewhere to blend up into.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTrue skin-close cutting at 1\/150\" on the tightest setting\u003c\/li\u003e\n\u003cli\u003eBlend range built into one blade, from 00000 up to 000\u003c\/li\u003e\n\u003cli\u003eSmooth transitions with no visible step between settings\u003c\/li\u003e\n\u003cli\u003eCarbon steel construction that holds an edge through daily shop use\u003c\/li\u003e\n\u003cli\u003eDirect fit on the Andis Master and Fade Master\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 01591\u003c\/li\u003e\n\u003cli\u003eAdjustable range: Size 00000 to size 000\u003c\/li\u003e\n\u003cli\u003eClosest cut: 1\/150\" (0.1 mm)\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbon steel\u003c\/li\u003e\n\u003cli\u003eFits: Andis Master and Fade Master clippers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eDo I still need a shaver for a bald fade?\u003c\/h3\u003e\u003cp\u003eAt 00000 this blade takes hair extremely close, which is enough for most skin fades. A foil shaver is still the tool for a completely bald finish.\u003c\/p\u003e\u003ch3\u003eWill it fit my cordless Master?\u003c\/h3\u003e\u003cp\u003eIt is specified for the Andis Master and Fade Master. Cordless Andis clippers can use different blades — check the part number against your model.\u003c\/p\u003e\u003ch3\u003eHow do I stop it running hot at the closest setting?\u003c\/h3\u003e\u003cp\u003eOil across the full cutting edge before every client and use blade spray between cuts. A close blade generates more friction, so lubrication matters more, not less.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the blade that makes a Master into a fade machine. One lever, from skin up to blendable, with no tool change in the middle of the taper.\u003c\/p\u003e\u003ch3\u003eAbout Andis\u003c\/h3\u003e\u003cp\u003eAndis has manufactured professional clippers, trimmers and blades for barbers since 1922.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Andis","offers":[{"title":"Default Title","offer_id":42791263404074,"sku":"","price":23.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Photoroom_20250510_162912.jpg?v=1746909068"},{"product_id":"oster-detachable-clipper-blade-size-00000-76918-006","title":"Oster Detachable Clipper Blade 00000 #76918-006 – Ultra Close Cut","description":"\u003cp\u003eThe closest cut Oster makes before you reach for a razor.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 00000 (#76918-006) cuts at 1\/125\" (0.2mm), making it the shortest blade in the standard Oster detachable range. That length is what you use for bald fades, skin-tight outlines and the very bottom of a fade where a 0000 still leaves visible shadow. It drops onto any Oster clipper that takes detachable blades.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSkin-tight results come straight off the clipper, with no razor pass needed.\u003c\/li\u003e\n\u003cli\u003eThe bottom of a fade sits cleaner because the blade goes shorter than a 0000.\u003c\/li\u003e\n\u003cli\u003eDetachable design means you swap sizes in seconds rather than adjusting a lever.\u003c\/li\u003e\n\u003cli\u003eGenuine Oster construction holds its cutting edge through professional daily use.\u003c\/li\u003e\n\u003cli\u003eFits the Oster clippers that accept the standard detachable blade system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade size: 00000\u003c\/li\u003e\n\u003cli\u003eCut length: 1\/125\" (0.2 mm)\u003c\/li\u003e\n\u003cli\u003ePart number: 76918-006\u003c\/li\u003e\n\u003cli\u003eType: Detachable clipper blade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003e00000 or 0000 — which do I actually need?\u003c\/h3\u003e\u003cp\u003e00000 cuts at 0.2mm, 0000 at 0.25mm. The difference is small but visible on a bald fade. Most barbers carry both.\u003c\/p\u003e\u003ch3\u003eWhich clippers does it fit?\u003c\/h3\u003e\u003cp\u003eOster clippers that use the detachable blade system, including the Classic 76 family. Check your model takes detachable rather than adjustable blades.\u003c\/p\u003e\u003ch3\u003eHow do I keep it cutting well?\u003c\/h3\u003e\u003cp\u003eClean and oil after every client. A dry blade dulls faster than a used one, and heat is what kills the edge.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eGoing shorter than a 0000 is what separates a clean bald fade from an almost-bald one. This is that blade.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster is a long-established manufacturer of professional clippers, blades and barbershop equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42791320518698,"sku":"","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Photoroom_20250510_165410.jpg?v=1746910508"},{"product_id":"oster-detachable-clipper-blade-size-0000-76918-016","title":"Oster Detachable Clipper Blade 0000 #76918-016 – Close Cut Precision","description":"\u003cp\u003eThe fade blade most barbers keep on the clipper by default.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 0000 (#76918-016) cuts at 1\/100\" (0.25mm), the standard close-cut length for tight fades, clean-ups and base work. It is close enough to give a near-skin finish but leaves fractionally more than a 00000, which makes it more forgiving on uneven scalps. It drops onto Oster clippers using the detachable blade system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTight fades come out clean because 0.25mm is the sweet spot between skin and shadow.\u003c\/li\u003e\n\u003cli\u003eMore forgiving than a 00000 on scalps with bumps, moles or scars.\u003c\/li\u003e\n\u003cli\u003eBlade swaps take seconds thanks to the detachable design.\u003c\/li\u003e\n\u003cli\u003eGenuine Oster manufacture means consistent cut length blade to blade.\u003c\/li\u003e\n\u003cli\u003eThe most-used size in most barbers' blade sets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade size: 0000\u003c\/li\u003e\n\u003cli\u003eCut length: 1\/100\" (0.25 mm)\u003c\/li\u003e\n\u003cli\u003ePart number: 76918-016\u003c\/li\u003e\n\u003cli\u003eType: Detachable clipper blade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eIs a 0000 close enough for a bald fade?\u003c\/h3\u003e\u003cp\u003eIt gets very close. For a true skin finish most barbers go to a 00000 or follow with a razor.\u003c\/p\u003e\u003ch3\u003eHow often should blades be replaced?\u003c\/h3\u003e\u003cp\u003eWhen they start pulling hair or leaving lines that oiling and cleaning do not fix. Sharpening extends life, but blades are consumables.\u003c\/p\u003e\u003ch3\u003eCan it be used on wet hair?\u003c\/h3\u003e\u003cp\u003eClipper blades are designed for dry hair. Wet cutting dulls blades faster and gives inconsistent lengths.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the blade that lives on the clipper. Everything else in the set is for a specific job; this one does most of them.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster manufactures professional clippers, detachable blades and barbershop equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42795950211114,"sku":"","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Photoroom_20250512_134145.jpg?v=1747071744"},{"product_id":"oster-detachable-clipper-blade-size-000-76918-026","title":"Oster Detachable Clipper Blade 000 #76918-026 – Close Cut Precision","description":"\u003cp\u003eClose, but not skin — the safe short blade.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 000 (#76918-026) cuts at 1\/50\" (0.5mm), giving a clean close finish without going skin-tight. It is the blade for clients who want short but not bald, and for the second step up in a fade where a 0000 would be too aggressive. Detachable mounting means it swaps onto any compatible Oster clipper in seconds.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClean close cuts without the exposed-scalp look some clients dislike.\u003c\/li\u003e\n\u003cli\u003eTwice the length of a 0000, which makes it the natural next step in a fade.\u003c\/li\u003e\n\u003cli\u003eSafer on scalps with texture, scarring or unevenness.\u003c\/li\u003e\n\u003cli\u003eDetachable design keeps blade changes to a couple of seconds mid-cut.\u003c\/li\u003e\n\u003cli\u003eGenuine Oster build for consistent, repeatable length.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade size: 000\u003c\/li\u003e\n\u003cli\u003eCut length: 1\/50\" (0.5 mm)\u003c\/li\u003e\n\u003cli\u003ePart number: 76918-026\u003c\/li\u003e\n\u003cli\u003eType: Detachable clipper blade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow does 000 compare to 0000?\u003c\/h3\u003e\u003cp\u003e000 cuts at 0.5mm, 0000 at 0.25mm. The 000 leaves visibly more, which is exactly what you want one step up a fade.\u003c\/p\u003e\u003ch3\u003eIs it good for a first-time short client?\u003c\/h3\u003e\u003cp\u003eYes — it is short without being bald, which is a much easier result to sell to a nervous client.\u003c\/p\u003e\u003ch3\u003eDo I need to oil it every use?\u003c\/h3\u003e\u003cp\u003eYes. Oiling before and after every client is what keeps the cut consistent and the blade from overheating.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the blade that builds the bottom third of a fade. Without it you are jumping from bald to guard one.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster is an established manufacturer of professional clippers, blades and barbershop equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42795968561194,"sku":"","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Photoroom_20250512_134426.jpg?v=1747071925"},{"product_id":"oster-detachable-blade-modified-0a-76918-036","title":"Oster Detachable Blade Modified 0A #76918-036 – Clean Cut for Textured Hair","description":"\u003cp\u003eBuilt for textured hair, where a standard blade fights you.\u003c\/p\u003e\u003cp\u003eThe Oster Modified 0A Detachable Blade (#76918-036) cuts at 1\/50\" (0.5mm) and is ground specifically for coarse and textured hair. The modification changes how the blade feeds hair into the cutting teeth, which is what stops the pulling and snagging that coarse, curly hair causes on a standard blade. It fits Oster clippers using the detachable system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCoarse and curly hair feeds through cleanly instead of catching and pulling.\u003c\/li\u003e\n\u003cli\u003eClients feel less tugging, which matters most on tightly coiled textures.\u003c\/li\u003e\n\u003cli\u003eThe 0.5mm cut length gives a close finish without going skin-tight.\u003c\/li\u003e\n\u003cli\u003eDetachable mounting means you can switch to it mid-cut when texture changes.\u003c\/li\u003e\n\u003cli\u003eGenuine Oster manufacture for consistent performance blade to blade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade size: Modified 0A\u003c\/li\u003e\n\u003cli\u003eCut length: 1\/50\" (0.5 mm)\u003c\/li\u003e\n\u003cli\u003ePart number: 76918-036\u003c\/li\u003e\n\u003cli\u003eType: Detachable clipper blade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow is it different from a standard 0A?\u003c\/h3\u003e\u003cp\u003eThe standard 0A cuts at 1.2mm. The Modified 0A cuts at 0.5mm and is ground for coarse and textured hair.\u003c\/p\u003e\u003ch3\u003eWhat hair type is it for?\u003c\/h3\u003e\u003cp\u003eCoarse, curly and tightly coiled hair, where standard blades tend to pull rather than cut.\u003c\/p\u003e\u003ch3\u003eDoes it work on straight hair too?\u003c\/h3\u003e\u003cp\u003eYes, though the benefit is specific to texture. On fine straight hair a standard 000 performs the same job.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eClients with coarse hair have been pulled at by every barber they have seen. A blade that does not do that gets remembered.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster manufactures professional clippers, detachable blades and barbershop equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797212500010,"sku":"","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Photoroom_20250512_224755.jpg?v=1747104494"},{"product_id":"oster-detachable-clipper-blade-size-0a-76918-056","title":"Oster Detachable Clipper Blade 0A #76918-056 – Smooth Medium Close Cut","description":"\u003cp\u003eMedium-close, and the one that does the bulk work.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 0A (#76918-056) cuts at 3\/64\" (1.2mm), which places it above the ultra-short blades and makes it the natural choice for bulk removal, blending and clean finishing. Longer than a 000 by a clear margin, it takes weight off quickly without exposing the scalp. It mounts to any Oster clipper using the detachable system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulk comes off fast, which shortens the first stage of a heavy cut.\u003c\/li\u003e\n\u003cli\u003eBlending is easier because 1.2mm bridges between the short blades and guard work.\u003c\/li\u003e\n\u003cli\u003eThe scalp stays covered, so it works on clients who do not want to see skin.\u003c\/li\u003e\n\u003cli\u003eDetachable design lets you drop into a shorter blade the moment you need it.\u003c\/li\u003e\n\u003cli\u003eGenuine Oster manufacture keeps cut length consistent across replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade size: 0A\u003c\/li\u003e\n\u003cli\u003eCut length: 3\/64\" (1.2 mm)\u003c\/li\u003e\n\u003cli\u003ePart number: 76918-056\u003c\/li\u003e\n\u003cli\u003eType: Detachable clipper blade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhen do I use a 0A instead of a guard?\u003c\/h3\u003e\u003cp\u003eFor bulk removal and blending where a guard would be too long and a 000 too short. It is the middle ground.\u003c\/p\u003e\u003ch3\u003eIs 0A the same as the Modified 0A?\u003c\/h3\u003e\u003cp\u003eNo. The standard 0A cuts at 1.2mm. The Modified 0A is a different blade with a shorter cut length designed for textured hair.\u003c\/p\u003e\u003ch3\u003eHow do I stop it leaving lines?\u003c\/h3\u003e\u003cp\u003eKeep it oiled, keep the teeth clean, and work with the blade flat against the head rather than at an angle.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the blade that takes the work out of a thick head of hair before the detailed cutting starts.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster manufactures professional clippers, detachable blades and barbershop equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797263224874,"sku":"","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Photoroom_20250512_235119.jpg?v=1747108322"},{"product_id":"oster-detachable-clipper-blade-size-1-76918-086","title":"Oster Detachable Clipper Blade Size 1 #76918-086 – Clean Even Cut","description":"\u003cp\u003eThe short, even length barbers build a taper on.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 1 (#76918-086) cuts hair to 3\/32\" (2.4 mm), giving a clean, uniform length for bulk removal and the low end of a taper. Detachable blades change the way a barber works — instead of stopping to fit a guard, you pull one blade off and click the next on with the clipper still in your hand.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDelivers a consistent 3\/32\" length across the whole head, with no guard flex to fight.\u003c\/li\u003e\n\u003cli\u003eSwaps in seconds, so moving between lengths does not break the rhythm of a cut.\u003c\/li\u003e\n\u003cli\u003eCuts through dense hair more cleanly than a guard on the same length.\u003c\/li\u003e\n\u003cli\u003eFits the Oster detachable system, so it works across your existing Oster clippers.\u003c\/li\u003e\n\u003cli\u003eSteel construction takes sharpening rather than being thrown away when it dulls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade Size: 1\u003c\/li\u003e\n\u003cli\u003eCut Length: 3\/32\" (2.4 mm)\u003c\/li\u003e\n\u003cli\u003ePart Number: 76918-086\u003c\/li\u003e\n\u003cli\u003eFits: Oster Classic 76, Octane, Model One, Model 10, Outlaw\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow does a size 1 blade compare to a #1 guard?\u003c\/h3\u003e\u003cp\u003eA plastic #1 guard on most clippers leaves roughly 1\/8\", and it flexes. The Oster size 1 blade cuts a fixed 3\/32\" and stays exactly there under pressure.\u003c\/p\u003e\u003ch3\u003eDoes it fit my Oster clipper?\u003c\/h3\u003e\u003cp\u003eIt fits Oster's detachable blade system — Classic 76, Octane, Model One, Model 10, and Outlaw clippers.\u003c\/p\u003e\u003ch3\u003eHow do I care for it?\u003c\/h3\u003e\u003cp\u003eBrush the hair out, oil the cutting edge before and after each use, and have it professionally sharpened rather than replacing it when it starts pulling.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eDetachable blades are what make an Oster cut fast. Size 1 is one of the lengths that stays on the station all day, because it handles bulk removal and sets up the rest of the fade.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster has manufactured professional clippers and detachable blades for the barbering trade for decades, and its detachable blade system remains an industry standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797263880234,"sku":"2209","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_Detachable_Clipper_Blade_Size_1_76918-086_Clean_Even_Cut.webp?v=1768276120"},{"product_id":"oster-detachable-clipper-blade-size-1a-76918-076","title":"Oster Detachable Clipper Blade Size 1A #76918-076 – Even Medium Cut","description":"\u003cp\u003eAn eighth of an inch, dead even, every pass.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 1A (#76918-076) leaves hair at 1\/8\" (3.2 mm) — a hair longer than the size 1 and one of the most-used working lengths in a barbershop. It slots into Oster's detachable system, so you can change length mid-cut without hunting for the right guard.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolds a true 1\/8\" through dense hair, where a plastic guard would ride up.\u003c\/li\u003e\n\u003cli\u003eClicks on and off in one motion, keeping the cut moving.\u003c\/li\u003e\n\u003cli\u003eIdeal for uniform buzz cuts and for setting the mid-section of a taper.\u003c\/li\u003e\n\u003cli\u003eCompatible across Oster's detachable-blade clippers, so it is not tied to one machine.\u003c\/li\u003e\n\u003cli\u003eSharpenable steel construction — a working blade, not a disposable part.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade Size: 1A\u003c\/li\u003e\n\u003cli\u003eCut Length: 1\/8\" (3.2 mm)\u003c\/li\u003e\n\u003cli\u003ePart Number: 76918-076\u003c\/li\u003e\n\u003cli\u003eFits: Oster Classic 76, Octane, Model One, Model 10, Outlaw\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhat is the difference between size 1 and 1A?\u003c\/h3\u003e\u003cp\u003eSize 1 cuts at 3\/32\" and 1A at 1\/8\". It is a small step, but it is the step that makes a blend look gradual instead of banded.\u003c\/p\u003e\u003ch3\u003eCan I use it on all hair types?\u003c\/h3\u003e\u003cp\u003eYes. Detachable blades cut cleanly on fine, coarse, and curly hair, which is one reason barbers prefer them to guards on thick heads.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003e1A is the everyday blade. If a barber owns three Oster blades, this is almost always one of them.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster builds professional clippers and detachable blades used in barbershops worldwide, with a blade system that has stayed compatible across generations of machines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797266206762,"sku":"","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_Detachable_Clipper_Blade_Size_1A_76918-076_Even_Medium_Cut.jpg?v=1768276328"},{"product_id":"oster-detachable-clipper-blade-size-1-5-76918-116","title":"Oster Detachable Clipper Blade Size 1.5 #76918-116 – Smooth Even Cut","description":"\u003cp\u003eThe in-between length that makes a blend disappear.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 1.5 (#76918-116) cuts at 5\/32\" (4 mm), sitting between the 1A and the size 2 so barbers can close the gap in a taper instead of jumping lengths. That half-step is exactly where visible blend lines come from, which is why serious Oster users own it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFills the gap between 1\/8\" and 1\/4\" so blends step smoothly instead of banding.\u003c\/li\u003e\n\u003cli\u003eCuts a consistent 5\/32\" on any hair density.\u003c\/li\u003e\n\u003cli\u003eDetaches and re-seats instantly, so you can test a length and move on.\u003c\/li\u003e\n\u003cli\u003eWorks across the Oster detachable clipper range.\u003c\/li\u003e\n\u003cli\u003eSteel blade set can be resharpened rather than replaced.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade Size: 1.5\u003c\/li\u003e\n\u003cli\u003eCut Length: 5\/32\" (4 mm)\u003c\/li\u003e\n\u003cli\u003ePart Number: 76918-116\u003c\/li\u003e\n\u003cli\u003eFits: Oster Classic 76, Octane, Model One, Model 10, Outlaw\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eDo I need a 1.5 if I already have 1A and 2?\u003c\/h3\u003e\u003cp\u003eIf you cut a lot of tapers, yes. The jump from 1\/8\" to 1\/4\" is where most visible lines appear, and 5\/32\" is the step that hides them.\u003c\/p\u003e\u003ch3\u003eHow often should it be oiled?\u003c\/h3\u003e\u003cp\u003eEvery use — a few drops along the cutting teeth before and after. Dry blades heat up, and hot blades are what clients complain about.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the blade that turns a decent taper into a clean one, without adding a single extra pass to the cut.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster is a long-standing manufacturer of professional clippers and detachable blades for the barbering industry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797266599978,"sku":"","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_Detachable_Clipper_Blade_Size_1.5_76918-116_Smooth_Even_Cut...avif?v=1768276812"},{"product_id":"oster-detachable-clipper-blade-size-2-76918-126","title":"Oster Detachable Clipper Blade Size 2 #76918-126","description":"\u003cp\u003eQuarter inch of clean, uniform length in a single pass.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 2 (#76918-126) cuts hair to 1\/4\" (6.3 mm), the standard longer working length for uniform cuts and the upper section of a taper. Because it is a steel detachable blade rather than a plastic guard, it holds that quarter inch through thick, curly, and coarse hair without riding up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemoves bulk fast at a true 1\/4\", cutting down the number of passes on a heavy head.\u003c\/li\u003e\n\u003cli\u003eKeeps the length honest where guards flex and leave an uneven finish.\u003c\/li\u003e\n\u003cli\u003eClicks on and off the Oster detachable system in seconds.\u003c\/li\u003e\n\u003cli\u003eGood starting length for uniform buzz cuts before dropping to shorter blades.\u003c\/li\u003e\n\u003cli\u003eServiceable steel construction rather than a throwaway attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade Size: 2\u003c\/li\u003e\n\u003cli\u003eCut Length: 1\/4\" (6.3 mm)\u003c\/li\u003e\n\u003cli\u003ePart Number: 76918-126\u003c\/li\u003e\n\u003cli\u003eFits: Oster Classic 76, Octane, Model One, Model 10, Outlaw\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eIs a size 2 blade the same as a #2 guard?\u003c\/h3\u003e\u003cp\u003eClose in length, different in behavior. The blade cuts a fixed 1\/4\" and does not flex or lift on dense hair the way a guard does.\u003c\/p\u003e\u003ch3\u003eWhat is it best used for?\u003c\/h3\u003e\u003cp\u003eUniform cuts, bulk removal on long hair, and the top of a taper before you step down through shorter blades.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eOn a thick head of hair, a size 2 blade does in one pass what a guard needs three passes and an argument to do.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster manufactures professional clippers and the detachable blade system that has been a barbershop standard for generations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797268271146,"sku":"","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_Detachable_Clipper_Blade_Size_2_76918-126..jpg?v=1768305916"},{"product_id":"oster-detachable-clipper-blade-size-3-5-76918-146","title":"Oster Detachable Clipper Blade Size 3.5 #76918-146 – Even 3\/8\" Cut","description":"\u003cp\u003eThree-eighths of an inch for longer work that still has to look sharp.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 3.5 (#76918-146) leaves hair at 3\/8\" (9.5 mm), a longer length used for uniform cuts, shaping, and bulk removal where a guard would struggle. Steel cutting teeth mean the length stays consistent even when the hair is thick enough to push a plastic attachment off the head.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolds a true 3\/8\" on dense hair, which plastic guards rarely manage.\u003c\/li\u003e\n\u003cli\u003eTakes weight out of long, heavy hair quickly and evenly.\u003c\/li\u003e\n\u003cli\u003eDetachable design lets you drop to shorter blades without changing tools.\u003c\/li\u003e\n\u003cli\u003eSuits uniform longer cuts, military-style tops, and pre-shaping before detail work.\u003c\/li\u003e\n\u003cli\u003eFits across Oster's detachable clipper range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade Size: 3.5\u003c\/li\u003e\n\u003cli\u003eCut Length: 3\/8\" (9.5 mm)\u003c\/li\u003e\n\u003cli\u003ePart Number: 76918-146\u003c\/li\u003e\n\u003cli\u003eFits: Oster Classic 76, Octane, Model One, Model 10, Outlaw\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhat is this length used for most?\u003c\/h3\u003e\u003cp\u003eLonger uniform cuts and taking weight out of thick hair before detailing. It is also a common starting length on a client who wants length left on top.\u003c\/p\u003e\u003ch3\u003eDoes a longer blade dull faster?\u003c\/h3\u003e\u003cp\u003eNot inherently — but longer blades cut more hair per pass, so oil them every use and clear the teeth between clients.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt handles the clients who want length kept, without forcing you into scissors-over-comb for the whole head.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster produces professional clippers and detachable blades used across the barbering trade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797270794282,"sku":"2975","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_Detachable_Clipper_Blade_Size_3.5_76918-146.webp?v=1768306245"},{"product_id":"oster-detachable-clipper-blade-size-3-3-4-76918-206","title":"Oster Detachable Clipper Blade Size 3 3\/4 #76918-206 – 1\/2\" Even Cut","description":"\u003cp\u003eHalf an inch of length, cut clean instead of chewed.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Clipper Blade Size 3 3\/4 (#76918-206) cuts at 1\/2\" (12.7 mm), the longest of the common working blades and the one barbers use for heavy bulk removal and long uniform cuts. At this length the advantage over a guard is obvious: the steel teeth shear the hair cleanly rather than pushing it aside.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTakes serious weight out of thick, long hair in a fraction of the passes.\u003c\/li\u003e\n\u003cli\u003eCuts a true 1\/2\" without the lifting and skipping a long plastic guard produces.\u003c\/li\u003e\n\u003cli\u003eDetachable design keeps the length change instant mid-service.\u003c\/li\u003e\n\u003cli\u003eIdeal for uniform longer styles and for rough-shaping before scissor work.\u003c\/li\u003e\n\u003cli\u003eCompatible with Oster's detachable blade clippers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade Size: 3 3\/4\u003c\/li\u003e\n\u003cli\u003eCut Length: 1\/2\" (12.7 mm)\u003c\/li\u003e\n\u003cli\u003ePart Number: 76918-206\u003c\/li\u003e\n\u003cli\u003eFits: Oster Classic 76, Octane, Model One, Model 10, Outlaw\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhen would I choose this over scissors?\u003c\/h3\u003e\u003cp\u003eWhen you need an even half inch across a large area quickly — bulk removal, uniform long buzz cuts, or knocking down length before detailing with shears.\u003c\/p\u003e\u003ch3\u003eDoes it work on curly hair?\u003c\/h3\u003e\u003cp\u003eYes, and better than a guard does. Detachable steel blades cut through curl instead of pushing it around.\u003c\/p\u003e\u003ch3\u003eHow do I stop it from pulling?\u003c\/h3\u003e\u003cp\u003eKeep the teeth clear of packed hair and oil before every use. Pulling on a detachable blade is almost always debris or a dry blade, not a dull one.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the blade that saves your wrist on heavy heads. One pass at half an inch and the real cut can start.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster manufactures professional clippers and detachable blades for barbers, with a blade system compatible across its clipper line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797271973930,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_detachable_clipper_blade_size_3.75_professional_even_cut.jpg?v=1768306685"},{"product_id":"oster-detachable-blade-flattop-t-76918-216","title":"Oster Detachable Clipper Blade Flattop T #76918-216 – Precision Flat Cut","description":"\u003cp\u003eA flat cutting plane for flattops that actually sit flat.\u003c\/p\u003e\u003cp\u003eThe Oster Detachable Flattop T Blade (#76918-216) cuts at 1\/50\" (0.5mm) and is purpose-ground for flattops, tight detailing and precision clipper-over-comb work. The T-shape widens the cutting surface at the ends, which is what lets you carry a level plane across the top of the head instead of chasing it in strips. It fits Oster clippers using the detachable blade system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlattops come out genuinely level because the wide T cutting face holds one plane.\u003c\/li\u003e\n\u003cli\u003eClipper-over-comb work speeds up with more cutting width per pass.\u003c\/li\u003e\n\u003cli\u003eThe 0.5mm cut length gives clean short detail without exposing scalp.\u003c\/li\u003e\n\u003cli\u003eDetail and corner work is easier with the blade extending past the housing.\u003c\/li\u003e\n\u003cli\u003eGenuine Oster construction and consistent grinding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlade type: Flattop T\u003c\/li\u003e\n\u003cli\u003eCut length: 1\/50\" (0.5 mm)\u003c\/li\u003e\n\u003cli\u003ePart number: 76918-216\u003c\/li\u003e\n\u003cli\u003eType: Detachable clipper blade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhy does a flattop need a special blade?\u003c\/h3\u003e\u003cp\u003eA level top requires a wide, consistent cutting plane. Standard blades cut in narrower strips, which is how flattops end up with hollows.\u003c\/p\u003e\u003ch3\u003eCan I use it for lineups?\u003c\/h3\u003e\u003cp\u003eThe T shape helps at corners, but a dedicated T-finisher trimmer is the tool for lineups.\u003c\/p\u003e\u003ch3\u003eDoes it fit all Oster clippers?\u003c\/h3\u003e\u003cp\u003eIt fits Oster clippers that take detachable blades. Check your model before ordering.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eFlattops are unforgiving. Anything that helps hold one plane across the top is worth having in the case.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster produces professional clippers, blades and barbershop equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797276430378,"sku":"","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Photoroom_20250513_002302_c5d76500-b169-4dc7-8929-2cad3cc20247.jpg?v=1747110290"},{"product_id":"oster-76913-586-t-finisher-replacement-blade","title":"Oster T-Finisher Replacement Blade – Ultra-Close T-Blade, Barber Trimmer Blade","description":"\u003cp\u003ePut the edge back on your T-Finisher.\u003c\/p\u003e\u003cp\u003eThe Oster T-Finisher Replacement Blade (#76913-586) is a genuine factory replacement blade set for the Oster T-Finisher trimmer, built for lineups, outlines and ultra-close detail work. A trimmer only performs as well as its blade, and once the edge goes the tool starts pushing hair rather than cutting it. Fitting a genuine blade restores the original cutting geometry rather than approximating it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLineups come back to factory sharpness instead of degrading into ragged edges.\u003c\/li\u003e\n\u003cli\u003eGenuine Oster manufacture means the blade sits at the correct alignment out of the box.\u003c\/li\u003e\n\u003cli\u003eReplacing a blade costs a fraction of replacing the trimmer.\u003c\/li\u003e\n\u003cli\u003eThe T-blade shape reaches into corners a standard blade cannot.\u003c\/li\u003e\n\u003cli\u003eRestores ultra-close finishing on necklines and beard edges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 76913-586\u003c\/li\u003e\n\u003cli\u003eFits: Oster T-Finisher\u003c\/li\u003e\n\u003cli\u003eType: Replacement T-blade set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhen should a trimmer blade be replaced rather than sharpened?\u003c\/h3\u003e\u003cp\u003eWhen it pulls after cleaning and oiling, or when the teeth are visibly chipped. Sharpening helps once or twice; after that the geometry is gone.\u003c\/p\u003e\u003ch3\u003eDo I need to zero-gap it after fitting?\u003c\/h3\u003e\u003cp\u003eMany barbers set the gap after fitting a new blade. Take care — an over-gapped blade cuts skin.\u003c\/p\u003e\u003ch3\u003eWill an aftermarket blade fit?\u003c\/h3\u003e\u003cp\u003eSometimes, but alignment and tolerance vary. A genuine blade removes that variable.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eYour lineups are your reputation. A dull trimmer blade shows up in every photo you post.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster manufactures professional clippers, trimmers, blades and barbershop equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797280755754,"sku":"","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_T-Finisher_replacement_trimmer_blade_ultra-close_T-blade..jpg?v=1768516021"},{"product_id":"oster-cordless-t-finisher-blade-2151044","title":"Oster Cordless T-Finisher Blade – Ultra-Close T-Blade, Barber Detail Trimmer","description":"\u003cp\u003eFresh edge for the cordless T-Finisher.\u003c\/p\u003e\u003cp\u003eThe Oster Cordless T-Finisher Replacement Blade (2151044) is the genuine replacement blade for the cordless T-Finisher trimmer, made for clean lineups, tight outlines and detailing. Cordless trimmers see harder use than corded ones because they get picked up for every quick touch-up, which means the blade wears faster. Swapping it restores the tool rather than replacing it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDetail work returns to factory sharpness for a fraction of the cost of a new trimmer.\u003c\/li\u003e\n\u003cli\u003eGenuine Oster fitment means correct alignment without shimming or adjustment.\u003c\/li\u003e\n\u003cli\u003eThe T-blade profile reaches corners and edges a standard blade misses.\u003c\/li\u003e\n\u003cli\u003eUltra-close cutting is restored on necklines, beard lines and hairlines.\u003c\/li\u003e\n\u003cli\u003eKeeps a heavily used cordless trimmer in the rotation instead of the drawer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 2151044\u003c\/li\u003e\n\u003cli\u003eFits: Oster Cordless T-Finisher\u003c\/li\u003e\n\u003cli\u003eType: Replacement T-blade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eIs the cordless blade the same as the corded T-Finisher blade?\u003c\/h3\u003e\u003cp\u003eNo. The cordless T-Finisher uses its own blade (2151044). Check the part number against your trimmer.\u003c\/p\u003e\u003ch3\u003eHow long should a trimmer blade last?\u003c\/h3\u003e\u003cp\u003eIt depends on volume. A busy barber doing lineups all day will get through blades far faster than one doing occasional detail work.\u003c\/p\u003e\u003ch3\u003eHow do I extend blade life?\u003c\/h3\u003e\u003cp\u003eBrush out the teeth after every client and oil regularly. Hair packed between the blades is what causes heat and dulling.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eA cordless trimmer with a dead blade is the most annoying tool in the shop. This fixes it in two minutes.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster is an established manufacturer of professional clippers, trimmers and blades.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797282885674,"sku":"","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_cordless_T-Finisher_replacement_trimmer_blade_ultra-close_T-blade.jpg?v=1768516563"},{"product_id":"oster-fast-feed-17-teeth-cryogen-x-medium-blade-76913-506","title":"Oster Fast Feed Cryogen-X Medium Blade – 17-Tooth Close Cut Clipper Blade","description":"\u003cp\u003eA 17-tooth blade for close, clean passes.\u003c\/p\u003e\u003cp\u003eThe Oster Fast Feed Cryogen-X Medium Blade is a 17-tooth replacement blade for the Fast Feed clipper. Tooth count controls how the blade takes hair — a 17-tooth medium blade cuts closer and cleaner than a wider-spaced blade, which is what you want for tight, controlled work rather than heavy bulk removal. Cryogen-X is Oster's cryogenically treated blade steel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClose, controlled cutting\u003c\/strong\u003e — 17 teeth take hair evenly for a clean finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores a tired clipper\u003c\/strong\u003e — a fresh blade is the cheapest fix for pushing and pulling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCryogen-X steel\u003c\/strong\u003e — Oster's cryogenically treated blade material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Oster part\u003c\/strong\u003e — correct fit and geometry on the Fast Feed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorth keeping spare\u003c\/strong\u003e — a backup blade means a dull edge never stops the chair.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade line:\u003c\/strong\u003e Oster Cryogen-X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Oster Fast Feed clipper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhat does the tooth count change?\u003c\/h3\u003e\u003cp\u003eFewer, wider teeth move more hair faster but leave a coarser finish. More teeth cut closer and cleaner. A 17-tooth medium blade sits on the close, controlled side.\u003c\/p\u003e\u003ch3\u003eWhat is Cryogen-X?\u003c\/h3\u003e\u003cp\u003eOster's cryogenic blade treatment — a deep-cold process applied to the steel during manufacture.\u003c\/p\u003e\u003ch3\u003eDo I need to align it after fitting?\u003c\/h3\u003e\u003cp\u003eYes. Set the alignment and test on your own arm before taking it to a client.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eThe Fast Feed is a workhorse. A fresh blade is what keeps it feeling like one.\u003c\/p\u003e\u003ch3\u003eAbout Oster\u003c\/h3\u003e\u003cp\u003eOster Professional has built barbershop clippers and blades since the 1920s.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oster","offers":[{"title":"Default Title","offer_id":42797284687914,"sku":"","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Oster_Fast_Feed_Cryogen-X_medium_clipper_blade_17_tooth..........jpg?v=1768517198"},{"product_id":"wahl-3-hole-adjusto-lock-clipper-blade-1005","title":"Wahl 1005 Adjusto-Lock Clipper Blade – 3-Hole, Adjustable 1–3mm Fade Blade","description":"\u003cp\u003eAdjustable fade control with a blade change that does not cost you alignment.\u003c\/p\u003e\u003cp\u003eThe Wahl 1005 Adjusto-Lock Clipper Blade is a 3-hole replacement blade that adjusts from 1mm to 3mm and fits the Wahl Senior, Designer, Sterling 4 and Sterling 1 Plus. The Adjusto-Lock design lets you swap the blade without disturbing the alignment you have already dialled in, which is what makes it a working barber's blade rather than a workshop job. Lever adjustment across the 1–3mm range covers taper and blend work without changing tools.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlend and taper on the fly using the 1mm to 3mm lever range\u003c\/li\u003e\n\u003cli\u003eFaster blade changes without losing set alignment\u003c\/li\u003e\n\u003cli\u003eStable seating under heavy daily use from the 3-hole mount\u003c\/li\u003e\n\u003cli\u003eOne blade covers four popular Wahl clipper bodies\u003c\/li\u003e\n\u003cli\u003eReady to install with hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCutting range: 1mm – 3mm (adjustable)\u003c\/li\u003e\n\u003cli\u003eMount: 3-hole\u003c\/li\u003e\n\u003cli\u003eFits: Wahl Senior, Designer, Sterling 4, Sterling 1 Plus\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWill this fit my Wahl Magic Clip or Legend?\u003c\/h3\u003e\u003cp\u003eNo. This is the 3-hole Adjusto-Lock blade for the Senior, Designer, Sterling 4 and Sterling 1 Plus. Magic Clip and Legend use different blade mounts.\u003c\/p\u003e\u003ch3\u003eHow close does it cut at its lowest setting?\u003c\/h3\u003e\u003cp\u003eThe adjustment range runs from 1mm to 3mm. It is a taper and blend blade, not a zero-gap skin blade.\u003c\/p\u003e\u003ch3\u003eDo I need to re-align after fitting it?\u003c\/h3\u003e\u003cp\u003eCheck alignment after any blade change. The Adjusto-Lock design is built to preserve your setting, but a quick visual check before the first client is good practice.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the blade that keeps a Senior feeling new. Swap it in, set your lever, and the clipper cuts the way it did the week you bought it.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional has manufactured clippers, trimmers and replacement blades for the barber trade since 1919 and builds many of its professional blades in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42798687617066,"sku":"","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_1005_Adjusto-Lock_clipper_blade_adjustable_3-hole................jpg?v=1768705040"},{"product_id":"1006-wahl-professional-standard-2-hole-clipper-blade-1mm-3mm-1006-wahl-professional-standard-2-hole-clipper-blade-1mm-3mm-1006","title":"Wahl 1006 Standard Clipper Blade – 2-Hole, Adjustable 1–3mm Pro Cut","description":"\u003cp\u003eBring a tired clipper back to a factory-fresh cut.\u003c\/p\u003e\u003cp\u003eThe Wahl #1006 Standard 2-Hole Clipper Blade is the replacement blade set for Wahl's adjustable-lever clippers, cutting from 1mm to 3mm across the lever range. Blades are a wear part — when a clipper starts pushing hair instead of cutting it, the blade is usually the problem, not the motor. Dropping a fresh 1006 on restores the taper and the lever action in a couple of minutes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFix a clipper that has gone dull\u003c\/strong\u003e — a fresh blade set is the cheapest fix for pushing, pulling and uneven tapers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull taper range on the lever\u003c\/strong\u003e — adjusts from 1mm to 3mm without touching a guard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 2-hole mounting\u003c\/strong\u003e — the traditional Wahl fitment that has been in shops for decades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep a spare in the drawer\u003c\/strong\u003e — a backup blade set means a bad blade never costs you a client.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting range:\u003c\/strong\u003e 1mm to 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Standard 2-hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Wahl #1006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhich clippers does the 1006 fit?\u003c\/h3\u003e\u003cp\u003eIt is the standard 2-hole blade set used across Wahl's adjustable-lever clipper range. Check that your clipper uses two-hole mounting rather than a snap-on or detachable system before ordering.\u003c\/p\u003e\u003ch3\u003eHow often should a blade be replaced?\u003c\/h3\u003e\u003cp\u003eWhen sharpening stops helping. In a busy shop that is often once or twice a year; a blade that snags, pulls or leaves lines after cleaning and oiling is done.\u003c\/p\u003e\u003ch3\u003eDo I need to align it after fitting?\u003c\/h3\u003e\u003cp\u003eYes. Set the cutter so its teeth sit slightly back from the still blade's teeth, then tighten evenly. Misaligned blades cut clients.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the part that makes an old clipper feel new again for a fraction of a replacement tool.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional has manufactured barbershop clippers and trimmers since 1919 and its blade fitments are among the most widely used in the trade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42798690730026,"sku":"","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl-2-Hole-super-taper-replacement-Blade-1006.jpg?v=1768705575"},{"product_id":"wahl-straight-trimmer-blade-for-ac-trimmer-8900-sidekick-1046","title":"Wahl 1046 Straight Trimmer Blade – Standard Cut, Pro Detail Blade","description":"\u003cp\u003eFactory-set sharpness for straightforward outlining work.\u003c\/p\u003e\u003cp\u003eThe Wahl 1046 Straight Trimmer Blade is a standard, non-adjustable replacement blade for Wahl's corded AC trimmers, set at the factory and ready to fit. Because it is not a zero-overlap blade, there is nothing to align or gap — you screw it on and cut. That makes it the practical choice for barbers who want reliable outlining and edging without maintaining a modified blade.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo setup required — factory-set and ready to cut on install\u003c\/li\u003e\n\u003cli\u003eClean outlines and edging from a precision-ground straight edge\u003c\/li\u003e\n\u003cli\u003eFits a wide range of Wahl corded trimmers, so one part covers several tools\u003c\/li\u003e\n\u003cli\u003ePredictable, repeatable results with no gap to drift out of true\u003c\/li\u003e\n\u003cli\u003eComplete kit with oil, screws and instructions in the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 1046\u003c\/li\u003e\n\u003cli\u003eType: Standard straight blade, non zero-overlap\u003c\/li\u003e\n\u003cli\u003eFits: Wahl AC Trimmer, 8900 series, Sidekick, 5 Star Razor Edger, Hero, Sterling Stylist and compatible models\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight trimmer blade\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eBlade oil\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eCan I zero-gap this blade?\u003c\/h3\u003e\u003cp\u003eIt is not designed to be. The 1046 is factory-set for safe, consistent use straight out of the box. If you want an adjustable zero-overlap edge, an adjustable T-blade is the right part.\u003c\/p\u003e\u003ch3\u003eWhich trimmers does it fit?\u003c\/h3\u003e\u003cp\u003eWahl's corded AC trimmer family — the AC Trimmer, 8900 models, Sidekick, 5 Star Razor Edger, Hero and Sterling Stylist among them. Check your model number before ordering.\u003c\/p\u003e\u003ch3\u003eHow do I keep it cutting cleanly?\u003c\/h3\u003e\u003cp\u003eBrush the teeth out between clients and put a drop of oil across the full cutting edge before each use. Dry blades dull fast and run hot.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eNo fiddling. Screw it on, oil it, and it lines the way a factory blade should. For barbers who do not want a modified blade near a client's hairline, that is the point.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional manufactures its professional trimmer blades in the USA and has supplied the barber trade since 1919.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42799000649770,"sku":"","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_1046_Straight_Trimmer_Blade.jpg?v=1768706074"},{"product_id":"wahl-balding-clipper-blade-2105","title":"Wahl 2105 Balding Clipper Blade – Ultra-Close Cut, Curved Top Pro Blade","description":"\u003cp\u003eThe closest cut Wahl builds.\u003c\/p\u003e\n\u003cp\u003eThe Wahl 2105 Balding Clipper Blade is a specialty replacement blade pairing a patented curved top blade with a super-fine bottom blade to cut closer than any standard taper blade. It is the blade for full-head balding, skin fades and hard outlining. The curved top is not cosmetic — it is what lets the blade get that close while reducing nicks and skin irritation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts to skin level\u003c\/strong\u003e — the closest performance available from a vibrator clipper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFewer nicks at that closeness\u003c\/strong\u003e — the patented curved top blade is designed to protect the skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper-fine bottom blade\u003c\/strong\u003e for a smooth finish rather than a scraped one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSharp enough to outline\u003c\/strong\u003e — doubles as a hard-line tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores a tired balding clipper\u003c\/strong\u003e without replacing the whole tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: 2105\u003c\/li\u003e\n\u003cli\u003eType: Balding blade\u003c\/li\u003e\n\u003cli\u003eDesign: Patented curved top blade with super-fine bottom blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\n\u003ch3\u003eIs a balding blade the same as zero-gapping a taper blade?\u003c\/h3\u003e\n\u003cp\u003eNo. A zero-gapped taper blade gets closer than stock, but a balding blade is ground specifically for skin-level cutting and goes closer still.\u003c\/p\u003e\n\u003ch3\u003eDo I need guards with it?\u003c\/h3\u003e\n\u003cp\u003eFor bald work, no. With attachment combs it will also give an even all-over cut, but its purpose is skin-close work.\u003c\/p\u003e\n\u003ch3\u003eHow do I avoid irritating the client's skin?\u003c\/h3\u003e\n\u003cp\u003eKeep the blade flat, keep the skin taut, do not press, and keep the blade cool and oiled. Most balding-blade irritation comes from angle and pressure, not the blade.\u003c\/p\u003e\n\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\n\u003cp\u003eBald fades are unforgiving and clients feel every pass. This blade is the reason the Wahl balding clipper has stayed a shop standard for decades.\u003c\/p\u003e\n\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\n\u003cp\u003eWahl is a long-standing professional clipper manufacturer producing clippers, trimmers and the specialty blades barbers rely on for close work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42799008251946,"sku":"1699","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_2105_balding_clipper_blade_ultra_close_cut.webp?v=1768706554"},{"product_id":"wahl-color-coded-clipper-guide-attachment-grey-0-5-1-16-1-5mm-3137-101","title":"Wahl 0.5 Grey Clipper Guard – Color-Coded 1.5mm Guide #3137-101","description":"\u003cp\u003eThe step between skin and a #1.\u003c\/p\u003e\n\u003cp\u003eThe Wahl #0.5 Grey Clipper Guard #3137-101 cuts at 1\/16\" (1.5 mm), the guard that bridges a bald or lever-closed pass and a full #1. On a tight skin fade that transition is where lines show, and a half-size is how you make it disappear. Wahl's color-coded system means you find it by grey rather than reading a number mid-cut.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKills the line above a skin fade\u003c\/strong\u003e — 1\/16\" (1.5 mm) fills the hardest transition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant identification\u003c\/strong\u003e — grab the grey guard without checking numbers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatable short lengths\u003c\/strong\u003e so the bottom of your fade is consistent client to client.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirm attachment\u003c\/strong\u003e that stays put through a fast pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Wahl full-size fit\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: 3137-101\u003c\/li\u003e\n\u003cli\u003eSize: #0.5\u003c\/li\u003e\n\u003cli\u003eCutting length: 1\/16\" (1.5 mm)\u003c\/li\u003e\n\u003cli\u003eColor: Grey\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\n\u003ch3\u003eWhat is the difference between a #0.5 and using the lever?\u003c\/h3\u003e\n\u003cp\u003eThe lever changes the blade itself and takes practice to keep even. A #0.5 guard gives you a fixed, repeatable length — many barbers use both, lever for the very bottom and the guard just above it.\u003c\/p\u003e\n\u003ch3\u003eWhere does it sit in a fade?\u003c\/h3\u003e\n\u003cp\u003eUsually the first guard above the skin or bald section, before you step up to a #1.\u003c\/p\u003e\n\u003ch3\u003eDoes the color mean anything beyond identification?\u003c\/h3\u003e\n\u003cp\u003eNo — it is a workflow feature. The grey guard is functionally identical to a black one of the same size.\u003c\/p\u003e\n\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\n\u003cp\u003eThe bottom third of a fade is where clients look hardest. Having a true half-size at 1.5 mm is what makes that section read as a gradient instead of a stack of steps.\u003c\/p\u003e\n\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\n\u003cp\u003eWahl produces professional clippers, blades and the color-coded guide comb system used in barbershops worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42799614263338,"sku":"","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_0.5_Grey_Clipper_Guard_Color-Coded_1.5mm_Guide_3137-101....jpg?v=1768883160"},{"product_id":"wahl-1-black-clipper-guide-3114-001","title":"Wahl #1 Black Clipper Guard – 1\/8\" (3mm) Full Size Guide #3114-001","description":"\u003cp\u003eThe guard that starts most fades.\u003c\/p\u003e\n\u003cp\u003eThe Wahl #1 Black Clipper Guide #3114-001 is a full-size snap-on attachment comb that cuts at 1\/8\" (3 mm), the length most barbers use as the first real guard above a skin fade. It snaps onto standard Wahl full-size clipper blades and holds position through a pass so your guard line lands where you put it. Replacing a worn or cracked guard is the fastest way to fix inconsistent fade lines.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePredictable 1\/8\" length\u003c\/strong\u003e — a true #1 cut, pass after pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStays seated\u003c\/strong\u003e — secure snap-on fit that does not walk mid-pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to identify\u003c\/strong\u003e — classic black guard, standard Wahl full-size fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixes uneven guard lines\u003c\/strong\u003e caused by a warped or worn old guard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheap insurance\u003c\/strong\u003e — a spare #1 costs almost nothing next to a redo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: 3114-001\u003c\/li\u003e\n\u003cli\u003eSize: #1\u003c\/li\u003e\n\u003cli\u003eCutting length: 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eType: Full-size snap-on attachment comb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\n\u003ch3\u003eHow do I know a guard has gone bad?\u003c\/h3\u003e\n\u003cp\u003eIf the fade line comes out uneven on a blade you know is sharp and aligned, check the guard for warping, worn teeth or a loose clip. Guards wear out quietly.\u003c\/p\u003e\n\u003ch3\u003eWill it fit non-Wahl clippers?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for standard Wahl full-size blades. Fit on other brands varies — check before assuming.\u003c\/p\u003e\n\u003ch3\u003eHow should I clean it?\u003c\/h3\u003e\n\u003cp\u003eBrush out hair, rinse, disinfect and dry fully. Do not soak plastic guards in hot water, which can warp them.\u003c\/p\u003e\n\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\n\u003cp\u003eThe #1 does more work than almost any other guard in the drawer. Having a fresh one means the length you expect is the length you get.\u003c\/p\u003e\n\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\n\u003cp\u003eWahl is one of the oldest professional clipper manufacturers, producing clippers, trimmers, blades and attachment guides used in barbershops worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42799616917546,"sku":"","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_1_Black_Clipper_Guard..jpg?v=1768908445"},{"product_id":"2-wahl-attachment-comb-03124-001","title":"Wahl #2 Black Clipper Guard – Full Size Attachment Comb #3124-001","description":"\u003cp\u003eQuarter-inch consistency, every head, every time.\u003c\/p\u003e\u003cp\u003eThe Wahl #2 Black Clipper Guard #3124-001 is a full-size attachment comb that holds a 1\/4\" cutting length on Wahl full-size clipper blades. The #2 is one of the two or three guards a barber reaches for on nearly every cut, which is exactly why it is the first to crack or go missing. This is the genuine replacement, moulded to snap on firmly and hold its length under pressure.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRepeatable 1\/4\" length so a client's cut matches last visit\u003c\/li\u003e\n\u003cli\u003eHolds position through a full pass thanks to a secure snap-on fit\u003c\/li\u003e\n\u003cli\u003eGenuine Wahl moulding for correct blade seating\u003c\/li\u003e\n\u003cli\u003eClassic black finish that matches a professional station\u003c\/li\u003e\n\u003cli\u003eBuilt for daily shop volume rather than occasional home use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 3124-001\u003c\/li\u003e\n\u003cli\u003eSize: #2\u003c\/li\u003e\n\u003cli\u003eCutting length: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eFits: Wahl full-size clipper blades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow long is a #2 in millimetres?\u003c\/h3\u003e\u003cp\u003eA #2 guard leaves roughly 6mm of hair, or 1\/4 inch.\u003c\/p\u003e\u003ch3\u003eWill it fit an Andis or BaBylissPRO clipper?\u003c\/h3\u003e\u003cp\u003eIt is cut for Wahl full-size clipper blades. Other brands use different blade profiles, so fit is not guaranteed.\u003c\/p\u003e\u003ch3\u003eWhy does my guard leave uneven length?\u003c\/h3\u003e\u003cp\u003eUsually because it is not fully seated or because the plastic has flexed from being twisted off the blade. Lift guards straight off, and replace any that rock on the blade.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eThe #2 does more work than any other guard on the rail. Keeping a spare in the drawer means one cracked guard never costs you a client.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional has manufactured clippers, blades and attachment combs for barbers since 1919 and sets the guard sizing most of the trade works to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42802264244266,"sku":"","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_2_Black_Clipper_Guard.jpg?v=1768909145"},{"product_id":"3-wahl-attachment-comb-3134-001","title":"Wahl #3 Clipper Guard – 3\/8\" Full Size Attachment Comb #3134-001","description":"\u003cp\u003eThe everyday length, cut the same way twice.\u003c\/p\u003e\u003cp\u003eThe Wahl #3 Clipper Guard #3134-001 is a genuine full-size attachment comb delivering a 3\/8\" cutting length on Wahl full-size clipper blades. The #3 sits in the middle of the guard set, which makes it the workhorse for uniform cuts, mid-fade blending and the length most walk-in clients ask for by number. Precision moulding is what keeps that number honest from cut to cut.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConsistent 3\/8\" results that make a repeat client's cut reproducible\u003c\/li\u003e\n\u003cli\u003eClean blending because the comb sits square to the blade\u003c\/li\u003e\n\u003cli\u003eStays locked during a pass with a secure snap-on design\u003c\/li\u003e\n\u003cli\u003eGenuine Wahl fit across the full-size clipper range\u003c\/li\u003e\n\u003cli\u003eDurable enough for daily barbershop volume\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 3134-001\u003c\/li\u003e\n\u003cli\u003eSize: #3\u003c\/li\u003e\n\u003cli\u003eCutting length: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eFits: All Wahl full-size clipper blades except Competition Series\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhat length is a #3 in millimetres?\u003c\/h3\u003e\u003cp\u003eA #3 leaves about 9.5mm, or 3\/8 of an inch.\u003c\/p\u003e\u003ch3\u003eCan I use it for blending into a fade?\u003c\/h3\u003e\u003cp\u003eYes. The #3 is a common middle step in a guard-to-guard fade, sitting between the #2 and the #4 in the blend.\u003c\/p\u003e\u003ch3\u003eHow do I clean it properly?\u003c\/h3\u003e\u003cp\u003eBrush out packed hair, rinse in warm soapy water, then dry fully before it goes back on the rail. Wet guards left on a blade cause rust.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the number clients ask for and the guard that has to be right. A worn or flexed #3 shows up immediately in a uniform cut.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional has supplied barbers with clippers, blades and guide combs since 1919.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42802293506090,"sku":"","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_3_clipper_guard_3_8_inch_full_size.jpg?v=1768909957"},{"product_id":"6-wahl-clipper-guide-black-3-4-3174-001","title":"Wahl #6 Black Clipper Guard – 3\/4\" Full Size Attachment Comb #3174-001","description":"\u003cp\u003eLonger lengths handled with the same discipline as a fade.\u003c\/p\u003e\u003cp\u003eThe Wahl #6 Black Clipper Guard #3174-001 is a full-size attachment comb that holds a 3\/4\" cutting length across Wahl full-size clipper blades. Longer guards are where cheap plastic gives itself away — flex at the tip means an uneven top and a client who notices. This one is moulded to hold its length under the pressure of a full pass.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEven 3\/4\" results on the top and crown without waves\u003c\/li\u003e\n\u003cli\u003eReliable bulk removal on longer, uniform cuts\u003c\/li\u003e\n\u003cli\u003eStays seated under pressure thanks to a firm snap-on fit\u003c\/li\u003e\n\u003cli\u003eClassic black finish that keeps a station looking uniform\u003c\/li\u003e\n\u003cli\u003eBuilt to survive daily professional handling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 3174-001\u003c\/li\u003e\n\u003cli\u003eSize: #6\u003c\/li\u003e\n\u003cli\u003eCutting length: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eFits: Wahl full-size clipper blades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow long is a #6?\u003c\/h3\u003e\u003cp\u003eA #6 leaves 3\/4 of an inch, roughly 19mm.\u003c\/p\u003e\u003ch3\u003eWhy do my longer guards leave ridges?\u003c\/h3\u003e\u003cp\u003eAlmost always because the comb is flexing or lifting mid-pass. Keep the guard flat against the head, work slower on longer lengths, and replace any comb that has gone soft at the tip.\u003c\/p\u003e\u003ch3\u003eIs it worth buying singles instead of a set?\u003c\/h3\u003e\u003cp\u003eIf you cut a lot of longer styles, the #6 wears out ahead of the rest of the set. Replacing the one you use is cheaper than replacing eight.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eLonger cuts leave nowhere to hide. A guard that holds its length is the difference between a clean uniform top and a client running a hand through it in the mirror.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional has made barber clippers, blades and attachment combs since 1919.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42802313822250,"sku":"","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_6_black_clipper_guard.....jpg?v=1768910156"},{"product_id":"7-wahl-plastic-7-8-guide-3145-001","title":"Wahl #7 Clipper Guard – 7\/8\" Full Size Plastic Guide #3145-001","description":"\u003cp\u003eBulk length taken down without losing the shape.\u003c\/p\u003e\u003cp\u003eThe Wahl #7 Clipper Guard #3145-001 is a genuine full-size plastic guide set to a 7\/8\" cutting length for Wahl full-size clipper blades. It is the guard for taking real weight out of a longer style while keeping a straight, even line — the step most barbers use before switching to scissors on top. Precision moulding keeps the length honest across the whole comb.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEven 7\/8\" removal on heavy, longer hair\u003c\/li\u003e\n\u003cli\u003eStraight lines across the top with no dip at the ends\u003c\/li\u003e\n\u003cli\u003eSecure snap-on fit that holds through a heavy pass\u003c\/li\u003e\n\u003cli\u003eDurable plastic built for professional daily use\u003c\/li\u003e\n\u003cli\u003eCorrect seating across Wahl's full-size clipper blades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 3145-001\u003c\/li\u003e\n\u003cli\u003eSize: #7\u003c\/li\u003e\n\u003cli\u003eCutting length: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eFits: All Wahl full-size clipper blades except Competition Series\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWhat is a #7 in millimetres?\u003c\/h3\u003e\u003cp\u003eRoughly 22mm, or 7\/8 of an inch.\u003c\/p\u003e\u003ch3\u003eWhen would I use a #7 rather than scissors?\u003c\/h3\u003e\u003cp\u003eFor fast, even bulk removal on a longer uniform cut. Scissors take over when the top needs texture, point cutting or a soft finish.\u003c\/p\u003e\u003ch3\u003eDoes hair type change how it cuts?\u003c\/h3\u003e\u003cp\u003eYes. On very thick or curly hair, take smaller sections and go slower — pushing a long guard through dense hair is what causes skipping and ridges.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the guard that saves ten minutes on a heavy head. Get the bulk off cleanly with a #7 and the scissor work becomes finishing rather than fighting.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional has supplied the barber trade with clippers, blades and guide combs since 1919.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42802320900138,"sku":"","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_7_clipper_guard_7_8_inch_full_size_plastic.jpg?v=1768910729"},{"product_id":"8-wahl-plastic-1-guide-3150-001","title":"Wahl #8 Clipper Guard – 1\" Full Size Plastic Guide #3150-001","description":"\u003cp\u003eA full inch of length you can guarantee.\u003c\/p\u003e\u003cp\u003eThe Wahl #8 Clipper Guard #3150-001 is a genuine full-size plastic guide delivering a 1\" cutting length on Wahl full-size clipper blades. It is the longest guard in the standard set and the one that does the heavy lifting on longer styles — taking bulk off fast while keeping the line even. Precision moulding keeps that inch consistent from the front of the comb to the back.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEven 1\" length across the whole head with no dipping\u003c\/li\u003e\n\u003cli\u003eFast bulk removal on longer cuts before any scissor work\u003c\/li\u003e\n\u003cli\u003eFirm snap-on fit that resists lifting under a heavy pass\u003c\/li\u003e\n\u003cli\u003eDurable moulded plastic built for professional daily use\u003c\/li\u003e\n\u003cli\u003eCorrect seating across Wahl's full-size clipper blade range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 3150-001\u003c\/li\u003e\n\u003cli\u003eSize: #8\u003c\/li\u003e\n\u003cli\u003eCutting length: 1\"\u003c\/li\u003e\n\u003cli\u003eFits: All Wahl full-size clipper blades except Competition Series\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eHow long is a #8?\u003c\/h3\u003e\u003cp\u003eOne inch, roughly 25mm — the longest guard in a standard eight-piece Wahl set.\u003c\/p\u003e\u003ch3\u003eWhy does a long guard skip on thick hair?\u003c\/h3\u003e\u003cp\u003eBecause dense hair packs into the comb faster than it can feed through. Take smaller sections, slow the pass, and clear the guard between passes.\u003c\/p\u003e\u003ch3\u003eDo I need this if I already scissor-cut the top?\u003c\/h3\u003e\u003cp\u003eIt saves time. A #8 pass takes the weight out evenly first, so your scissor work becomes shaping instead of bulk removal.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eIt is the guard that makes a heavy head manageable in one pass. Get the bulk off level with a #8 and everything after it is finishing work.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional has produced barber clippers, blades and attachment combs since 1919.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42802327617578,"sku":null,"price":3.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_8_clipper_guard_1_inch_full_size_plastic.jpg?v=1768910935"},{"product_id":"wahl-8-pack-color-coded-clipper-guards-3170-400","title":"Wahl 8-Pack Color-Coded Clipper Guards – Full Size Set w\/ Caddy #3170-400","description":"\u003cp\u003eEight lengths, eight colors, zero second-guessing.\u003c\/p\u003e\u003cp\u003eThe Wahl 8-Pack Color-Coded Clipper Guards #3170-400 is a full-size attachment comb set covering the eight lengths a barber reaches for daily, each in its own color for instant identification. Color coding is the practical part: mid-fade, you grab by sight instead of squinting at a moulded number. The set ships with a caddy so the guards live in order instead of scattered across the station.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFaster guard changes because color tells you the size at a glance\u003c\/li\u003e\n\u003cli\u003eFewer mistakes on a fade when the wrong guard is obvious before it touches hair\u003c\/li\u003e\n\u003cli\u003eEvery common length covered from 1\/8\" through 1\"\u003c\/li\u003e\n\u003cli\u003eAn organized station thanks to the included storage caddy\u003c\/li\u003e\n\u003cli\u003eSecure snap-on fit that holds through a full pass\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 3170-400\u003c\/li\u003e\n\u003cli\u003eSizes: 1\/8\", 1\/4\", 3\/8\", 1\/2\", 5\/8\", 3\/4\", 7\/8\", 1\"\u003c\/li\u003e\n\u003cli\u003eFits: All Wahl full-size clipper blades except Competition Series\u003c\/li\u003e\n\u003cli\u003eIncludes: Storage caddy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\u003ch3\u003eWill these fit my Wahl Senior or Magic Clip?\u003c\/h3\u003e\u003cp\u003eYes. They fit Wahl full-size clipper blades, which covers the Senior, Magic Clip and the rest of the full-size range. The exception is the Competition Series.\u003c\/p\u003e\u003ch3\u003eDo they work on Andis or BaBylissPRO clippers?\u003c\/h3\u003e\u003cp\u003eThey are cut for Wahl full-size blades. Other brands use different blade profiles and the fit is not guaranteed.\u003c\/p\u003e\u003ch3\u003eHow do I clean them?\u003c\/h3\u003e\u003cp\u003eRinse in warm soapy water, brush out packed hair, and dry fully before storing. They can also be wiped with barbicide between clients.\u003c\/p\u003e\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\u003cp\u003eColor coding saves seconds on every guard change, and seconds add up across twelve heads. The caddy keeps the set together, which is the only reason a full set survives a year in a busy shop.\u003c\/p\u003e\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\u003cp\u003eWahl Professional has manufactured clippers, blades and attachment combs for barbers since 1919.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42802335318058,"sku":"","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_8_pack_color_coded_clipper_guards_with_caddy......webp?v=1769048755"},{"product_id":"wahl-peanut-replacement-blade-2068-300","title":"Wahl Peanut Replacement Blade – Standard Snap-On Trimmer Blade #2068-300","description":"\u003cp\u003eMake the Peanut cut like it did out of the box.\u003c\/p\u003e\n\u003cp\u003eThe Wahl Peanut Replacement Blade #2068-300 is the genuine standard snap-on blade for the Wahl Peanut trimmer, restoring clean cutting for outlining, edging and detail work. The Peanut is a tool barbers use dozens of times a day, and its blade wears accordingly — a dull one turns crisp detail work into repeated passes. Snap-on replacement means no tools and no downtime.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail work gets sharp again\u003c\/strong\u003e — a fresh blade cuts a clean line the first pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap-on swap\u003c\/strong\u003e — change it in seconds, no screwdriver required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Wahl part\u003c\/strong\u003e for correct fit and tension on the Peanut body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo more pulling\u003c\/strong\u003e on coarse hairline and beard hair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFraction of the cost of a new trimmer\u003c\/strong\u003e when the tool still runs fine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: 2068-300\u003c\/li\u003e\n\u003cli\u003eType: Standard snap-on trimmer blade\u003c\/li\u003e\n\u003cli\u003eFits: Wahl Peanut trimmer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions Barbers Ask\u003c\/h3\u003e\n\u003ch3\u003eHow often should a Peanut blade be replaced?\u003c\/h3\u003e\n\u003cp\u003eWhenever it pulls or stops cutting cleanly after brushing, oiling and realigning. High-volume barbers go through them faster than the average.\u003c\/p\u003e\n\u003ch3\u003eDo I need to align it after snapping it on?\u003c\/h3\u003e\n\u003cp\u003eCheck the cutter position and adjust if needed, then oil before use. Snap-on blades usually seat correctly but are worth verifying.\u003c\/p\u003e\n\u003ch3\u003eIs there a T-blade version for the Peanut?\u003c\/h3\u003e\n\u003cp\u003eThis is the standard blade. Wahl also offers a T-blade Peanut configuration — match the blade to the trimmer you own.\u003c\/p\u003e\n\u003ch3\u003eWhy Barbers Love It\u003c\/h3\u003e\n\u003cp\u003eThe Peanut is small enough that barbers forget it needs maintenance like anything else. A fresh blade instantly makes it feel like the tool everybody recommends again.\u003c\/p\u003e\n\u003ch3\u003eAbout Wahl\u003c\/h3\u003e\n\u003cp\u003eWahl manufactures professional clippers, trimmers and replacement blades, including the long-running Peanut trimmer platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Barber Connect – Stocked. Connected. Barber Approved. 💈\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast Shipping\u003c\/li\u003e\n\u003cli\u003eAuthorized Dealer\u003c\/li\u003e\n\u003cli\u003eManufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wahl","offers":[{"title":"Default Title","offer_id":42802404261930,"sku":"","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1746\/4233\/files\/Wahl_Peanut_replacement_blade_standard_snap_on_3ff07d96-8f95-47b1-93a9-2079fd8476bc.jpg?v=1769052207"}],"url":"https:\/\/www.yourbarberconnectstore.com\/collections\/blades-and-guards.oembed?page=10","provider":"Your Barber Connect","version":"1.0","type":"link"}